======================================
GLASS MANUFACTURER MAIN PRODUCT
======================================
Insulating glass units shall consist of two or more lites of glass separated by a desiccant filled roll-formed aluminum or steel edge spacer with 4 bent corners and zinc plated steel straight key joint to provide a hermetically sealed and dehydrated space. The spacer contains a desiccant – molecular sieve which eliminates moisture in the cavity. Insulating glass shall be dual seal with a primary seal of black (or gray) polyisobutylene (pib) and a secondary seal of black (or gray) silicone or polysulfide. The combination of two panels of glass and trapped air is what makes an Insulating glass a superior energy efficient method of glazing. The whole unit is hermetically assembled by a double barrier sealant.
An Insulating glass with a Low-E coating effectively enhances performance. The heat insulation effect could be further improved if Argon or other special gases are filled in the cavity.
Features for insulating glass：
1、Energy Saving
2、Sound Insulation
3、Water Condensation Prevention
Specifications of insulating glass：
Maximum Size: 2400×3660mm (96”×144”)
Minimum Size: 180×300mm (7”×12”)
Spacer Width: 6mm(1/4”), 9mm(3/8”), 12mm(1/2”), 16mm(5/8”), 20mm(3/4”)
Certification & Complied standards:
China CCC Safety Insulated Glass Certificate (GB/T 11944)
Chinese Standard GB/T 11944 Insulated Glass
Packing :
By strong sea-worthy wooden crates
Products Overview
Low-E coated glass is a 2.5-25μm wavelength range of infrared radiation COSCO high reflectivity coating glass, the products have a high visible light transmission rate, at the same time infra-red has a strong role in blocking, it has good insulation properties, in the summer to prevent too much sunlight can enter the room, the indoor winter heat spillover block to meet the energy requirements.
LOW-E glass is an effective energy-saving principle of the radiation so that the rate of glass E value from 0.84 down to 0.25 below. Glass There are three ways of heat transfer; radiation, convection, conduction (as shown). The strength of the absorptive capacity of the glass is directly related to the glass on the far-infrared heat blocking effect. Low-emissivity glass is not easy to absorb the thermal radiation energy from outside, so the glass through conduction, radiation, heat transfer by convection less, Low-E glass is the limit of this part of the heat transfer. The floor of our living room temperature in the winter due to high temperature than the outdoor, LOW-E glass can prevent the indoor to the outdoor heat radiation, and to prevent the spread of heat loss; and outdoor temperature in summer is higher than room temperature, and the summer of LOW-E glass can be Outdoor radiant energy to prevent access to the indoor, so no matter summer LOW-E can play the role of a good thermal insulation with excellent energy saving effect.
Low-E glass production process by way of two off-line Low-E glass and on-line Low-E glass in two.
Off-line Low-E glass features:
① U value of low, significant energy-saving effect.
② wide spectrum of choice, rich colors.
③ multi-product, multi-portfolio changes.
④ better get to meet the design requirements of designers.
Online Low-E glass features:
① chemical properties of stability, not oxidation, can be a single use, long-term storage.
② thermal processing performance is stable, flat steel can be directly carried out, and bend steel, and laminated so on.
③ solid film, good resistance to abrasion.
④ synthetic insulating glass, the edge does not need in addition to film.
Color: net color, light gray, light blue, light green,a variety of colors, etc.
Electrochromic Glass /Switchable Glass
(Also called: Electric-control Curtain Glass / Smart glass/Liquid Crystal Glass)
Smart glass or switchable glass,also called smart windows or switchable windows in its application to windows or skylights,refers to electrically switchable glass or glazing which changes light transmission properties when voltage is applied.
Certain types of smart glass can allow users to control the amount of light and heat passing through:with the press of a button,it changes from transparent to translucent,partially blocking light while maintaining a clear view of what lies behind the window.Another type of smart glass can provide privacy at the turn of a switch.
The use of smart glass can save costs for heating ,air-conditioning and lighting and avoid the cost of installing and maintaining motorized light screens or blinds or curtains.When opaque,liquid crystal or electrochromic smart glass blocks most UV,thereby reducing fabric fading;for SPD-type smart glass,this is achieved when used in conjunction with low-e low emissivity coatings.
Critical aspects of smart glass include installation costs,the use of electricity,durability,as well as functional features such as the speed of control,possibilities for dimming,and the degree of transparency of the glass.
Basic Information
Glass Type (Laminated Glass):
Annealed, tempered ,curved…etc. (laminated with various of Glass )
Glass Color:
Clear, bronze, gray, green tint etc. (laminated with various of Glass )
Dimension:
Up to 47.24” x 118.11” (1200mm x 3000mm)
Thickness:
8mm (3mm+3mm) to 22mm (10mm+10mm)
Shape:
Any shape, including holes anywhere
Electrical Parts
Electrical:
Driving voltage: 75volts A.C.
Current :less than 20 mA/ft2
Power :approx. 1 watt/ft2
Power Supply:
110V or 220V (use the general electrical outlet )
Others
Environment:
Storage:-20oC to 70oC (-4oF to 158oF)
Operation: -10oC to 60oC (14oF to 140oF)
Switch Time:
Approx. 100 milliseconds at room temperature
Optical:
Transmission: 76%
View angle: approx. 140o
Life:
Greater than 10 years
Introduction
Laminated glass is a combination of two or more glass sheets with one or more interlayers of plastic (PVB) or resin. In case of breakage, the interlayer holds the fragments together and continues to provide resistance to the passage of persons or objects. This glass is particularly suitable where it is important to ensure the resistance of the whole sheet after breakage such as: shop-fronts, balconies, stair-railings, roof glazing.
Product Characteristics
1. Excellent safety to human body, anti-bumping and shocking, high resistance to piercing.
2. Good soundproof and heat isolation effect.
3. Strong UV resistance.
4. Diversified colors.
5. Durable and fadeless.
Product Specifications
Maximum size: 3660mmx2440mm
Minimum size: 300mmx300mm
Number of layers: 1-4
PVB color: Clear, milky, gray, blue, green, pink and bronze, etc.
PVB thickness: 0.38mm , 0.76mm and 1.52mm or above.
Packing
By strong sea-worthy wooden crates.
======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Tempered glass
Laminated Glass
Perspective Glass
Hollow glass
Coated glass
Ultra-white Glass
Frosted glass
Low-e Glass
Colored glass
Glass curtain wull
Smart glass
Armored glass
Mirror Series
======================================
GLASS MANUFACTURER CONTACT INFO
======================================
Welcome to
Nanjing Xinfurui Glass Industries Co.,Ltd.
Address： No. 88-3 Shuangqi Road,Jiangning District,Nanjing
P.C： 211164
Mobile： 13770987779 13952019977
Tel： 025-51193415、51193223、86131099
Fax： 025-51193223
E-mail：
[email protected] Website：
http://www.xfrglass.com ======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
NANJING XINFURUI GLASS INDUSTRIES CO., LTD. It is a research and development, production, sales and service in a modern high-tech glass processing company, is producing Tempered glass, laminated glass, Hollow glass various industries such as glass, intelligence, electronic control dimming glass series, Perspective Glass, F79B-25-XFR 1 type Armored glass, light glass professional manufacturer of special glass, with modern production lines, first-class equipment and technical staff, managers, high-quality staff. Five professional processing workshop, Tempered glass workshop, laminated glass workshop, dimming glass workshop, Armored glass workshop, Perspective Glass Workshop. Company production base in Nanjing, the business covers national and international markets.
Quality Management System：
Passed the ISO 9001 quality system certification, the mandatory building safety glass “3C” certification. Dimming glass by GB18045-2000/GB9656-2003 Railway vehicle / vehicle testing national standards of safety glass.
The project has been completed:
1、World Expo 2010 Shanghai Jiangsu Museum, the World Meteorological Museum, Museum of Pakistan, China Telecom Building, 6F Experience Museum
2、FAW-Volkswagen car show (Pudong Airport and Beijing Airport, Tianjin Airport, Shenyang Airport 11 Airport)
3、10 floor office building and Shanghai Banking Corporation office lobby
4、Business Hotel Hangzhou International Conference Center.
5、Boeing Beijing Office
6、The national command center Kunlun Gas
7、Kazakhstan (Auto Windshield) the United States. Singapore. Laos
8、Nanjing Greenland Financial Center (Jiangsu undertaking of a high) built-in glass
If you are looking for any glass products in China, or need any help of glass(specially laminated glass, smart glass) in China, just send an email to [
[email protected] ] , and you will get the answers of what you need in 24 hours. To learn more, please go to
www.HelloGlass.com .
