======================================
GLASS MANUFACTURER MAIN PRODUCT
====================================== 
GLASS MANUFACTURER MAIN PRODUCT
======================================
Types： Silicone sealant
Product number： ZJ-1000
Product Name： Acetoxy Glass Silicone Sealant
Number ： 2191
Product Introduction ：
Description
It is one-part acetoxy silicone sealant. It is fast curing and permanently flexible, waterproof and outstanding weather resistant. It is suitable for sealing, repairing, glazing and mending of glass, aquarium, auto windscreen, glazing for window panels and other metal frameworks bonding. Where to use
They are widely used in industry, building, automotive, packaging, and business, advertisement, and family decoration. They are mainly used in joints adhesion and seal among the glass, tiles, ceramics, aluminum, and fiber glass, powder-coated and non-oily wood. Characteristic
1. One -part, acetoxy room temperature cure, easy to apply.
2. Excellent contact-change ability, no seasonal limited use.
3. Excellent adhesion to most building materials.
4. Outstanding weatherproofing ability, with service life of tens of years.
5. Medium or low modulus, excellent tensile and compression restoring ability. Application
1. Clean with solvents such as toluene or acetone to keep the substrate surfaces completely clean and dry.
2. For better appearance cover outside of joint areas with masking taps before application.
3. Cut nozzle to desired size and extrudes sealant to joint areas.
4. Tool immediately after sealant application and remove masking tape before sealant skins.
Limitations
1. Don’t use to the joints, which is hidden in earth for long time.
2. Don’t use in areas where no moisture has.
3. Don’t use in places where have permeated grease, plasticizer or solvent such as wood permeated oil, uncured or half-cured resins, etc.
4. The surfaces coated with paint are unsuitable for sealant.
5. The products have poor adhesion to concrete, marble, mirror-glass, Zn-plated materials because of corrosion produced by acetoxy sealant. In this case, please select neutral silicone sealant. Technical Data (for reference) 
1. Packing: 300ml. In a plastic cartridge, 24 cartridges/ carton
2. Colors: clear, black, silvery gray, white.
3. Stored in cool and dry place, the shelf life is 9 months.
Description
It is one-part acetoxy silicone sealant. It is fast curing and permanently flexible, waterproof and outstanding weather resistant. It is suitable for sealing, repairing, glazing and mending of glass, aquarium, auto windscreen, glazing for window panels and other metal frameworks bonding. Where to use
They are widely used in industry, building, automotive, packaging, and business, advertisement, and family decoration. They are mainly used in joints adhesion and seal among the glass, tiles, ceramics, aluminum, and fiber glass, powder-coated and non-oily wood. Characteristic
1. One -part, acetoxy room temperature cure, easy to apply.
2. Excellent contact-change ability, no seasonal limited use.
3. Excellent adhesion to most building materials.
4. Outstanding weatherproofing ability, with service life of tens of years.
5. Medium or low modulus, excellent tensile and compression restoring ability. Application
1. Clean with solvents such as toluene or acetone to keep the substrate surfaces completely clean and dry.
2. For better appearance cover outside of joint areas with masking taps before application.
3. Cut nozzle to desired size and extrudes sealant to joint areas.
4. Tool immediately after sealant application and remove masking tape before sealant skins.
Limitations
1. Don’t use to the joints, which is hidden in earth for long time.
2. Don’t use in areas where no moisture has.
3. Don’t use in places where have permeated grease, plasticizer or solvent such as wood permeated oil, uncured or half-cured resins, etc.
4. The surfaces coated with paint are unsuitable for sealant.
5. The products have poor adhesion to concrete, marble, mirror-glass, Zn-plated materials because of corrosion produced by acetoxy sealant. In this case, please select neutral silicone sealant. Technical Data (for reference)
Specifications
JC/T 485; GB/T 14683-2003 A G 20LM; ISO11600 F class 20LM
1. Packing: 300ml. In a plastic cartridge, 24 cartridges/ carton
2. Colors: clear, black, silvery gray, white.
3. Stored in cool and dry place, the shelf life is 9 months.
Types： Silicone sealant
Product number： ZJ-225
Product Name： General Use Neutral Silicone Sealant
Number ： 1204
Product Introduction ：
Description
Zhijiang ZJ-225 Neutral Silicone Sealants is a one-part, medial modulus, neutral curing sealant. It has an excellent adhesive ability to most construction materials without a primer. Characteristic
a. Can be easily used and extruded any time.
b. Excellent contact change and extrusion ability, in any air temperature( -40℃ to 100℃) can extrude easily.
c. Excellent adhesion to stone, ceramics, concrete, and other building materials. It has no pollution to porous materials.
d. Outstanding weatherproofing ability, resisting to ultraviolet ray, ozone.
e. Be compatible with all kinds of silicone structural sealant. Use limitations
ZJ-225 is not fit for structural usage. It should NOT be applied in the following conditions:
a. To all materials that bleed oils, plasticizers or solvents, and green or partially sulfur zed gaskets or tapes, etc.
b. In totally confined space (Silicone sealant need the water in the air to cure)
c. For continuous immersion in water or below-grade applications all the year.
d. To painted surfaces, may cause seal failure as the paint cracking or paint stripping
e. To frost or wet surfaces
f. Surface touch the food directly
g. Easily suffer mechanical clash Typical properties (for reference)
The following data is for reference, is not suggested to make standard. 
ZJ-225 is fit for sealing all kinds of glass doors and windows. Colors
ZJ-225 is available 4 standard colors: white, black, grey, brown. Packaging
ZJ-225 is available in net 300ml plastic cartridges, 24 cartridges per carton,
And 500ml aluminum sausage, 20 sausages per carton. Storage and usable life
When stored under dry and airy, 27℃ or lower temperature conditions in the original unopened container.ZJ-225 has a shelf life of 9 months from the date of manufacture。 Specifications
JC/T881-2001 12.5E; GB/T14863-2003 12.5E。 Material feature
ZJ-225 can keep good viscous degree and can easily extrude at -25℃ to 50℃. Construction project technology service
It’s needed to take the design, choose materials, operation into consideration for the structural joint sealing. The technical communication between suppliers and applicants are necessary for the present situation: varied sealant types, daily changing materials and the compatibilities between surface treatment and materials. Hangzhou Zhijiang Silicone Chemicals Co., Ltd. gives construction project technical services as follows:
Adhesion Testing
ZHIJIANG Silicone will evaluate tests about the adhesion of our products to job site or representative job site materials in standard laboratory. Results of the adhesion testing, product recommendations and surface preparation will be forwarded in writing.
Compatibility Testing
Incompatibility of glazing materials can lead to sealant discoloration and/or loss of adhesion. To help protect against these problems and to ensure compatibility, ZHIJIANG will also test and provide information on the compatibility of accessory materials (gaskets, spacers, etc.) and other ZHIJIANG Silicone sealants.
Stain Testing
Because of the staining problems that may occur with porous substrates, ZHIJIANG is willing to run laboratory tests and provide information to you on the possibility of staining occurring with the construction materials being used. Weatherproofing joint design
Wider joints accommodate more movement than narrow joints. When ZJ-225 is being used for wide movement joint, a minimum depth of 6 mm and a maximum 12mm sealant/substrate bond is necessary to ensure adequate adhesion. A properly designed moving joint will have a 2:1 width to depth ratio.
The expansion and contraction of joints is mainly caused by season or daily temperature changes. The designed joint width is at least double estimated movement, better quadruple to remedy errors of materials and application. All size of joints should be gotten through calculation of joint movements, especially wider joint size necessary for plastic board with higher thermal expansion rations. Application
Surface clean
Cleaning all grease, dirty, water, klunky sealant from surface, accessories and protective coatings and any pollutant left inside joints and sunken parts.
Metal and glass should be cleaned by two-cloth. The solvent used will be methyl ethyl ketone, tolune or xylene and observe the using rule. If for plastic, use the guided solvent from suppliers.
Depending on the condition of the surface, porous substrates may require abrasion cleaning, solvent cleaning or both. Surface must keep dry and clean. Dirties and other impurities should be blew off by non-oily compressed air or gulfed by vacuum cleaner.
Priming
It’s commonly not necessary for priming on using zhijiang silicone sealant. If recommending primer after adhesion tests pour zhijiang primer to a clean, dry, lint-free cloth and gently wipe surface till a thin film formed. Later application.
Masking
Masking tape should be used to keep excess sealant from contacting adjacent areas where it is not intended, to ensure an aesthetically pleasing job. Tool the sealant with light pressure before a skin begins to form (typically 10 to 20 minutes). Remove the masking tape before the sealant skins over.
Backer materials
Generally, three common backer rod types can be used: Open-cell polyurethane, Closed-cell polyethylene, Non-gassing polyolefin. When a backer rod cannot be positioned in a joint opening, a Teflon or polyethylene tape should be used to prevent three-sided adhesion.
Application
Install backing material or joint fillers. Set blocks, shims and tapes. Cut the nozzle of ZJ-225 and fit into gun and make extrusion diameter fit for joint. Continuous extrude sealant into joint without air forming. Care must be taken to ensure complete fill of the sealant cavity. Tool the sealant with light pressure before a skin begins to form. Make sealant surface a sunken shape using raised tool. Not use soap water for assistant. Remove the masking tape after tooling. The sealant for bottom joints should be tooled into slope to protect water accumulation. The surface of sealant should be dry and frost-free. The uncured sealant is not permitted to contact with polished granite, metal or glass to preventing a thin film formed on the substrate surface to affect the esthetic things. Use masking tape. If sealant contact with non-porous material, clean out with methyl ethyl ketone, tolune or xylene.
Sealant repair
If a sealant has failed, it is good practice to understand why it failed and decide which measure to take. To see:
Whether aging of original sealant; Joint movement over the bearing ability for sealant; Adhesion loss or incompatibility between sealant and joint material; Thickness not proper of sealant; Others. Handling precautions
This paper doesn’t include MSDS for product. It should be notified:
1. Not contact sealant with food or cosmetics;
2. Not contact skin for long time about uncured sealant;
3. Rinse eyes with large quantities of water and seek medical check if sealant drops into eyes.
4. Not put sealant at children’s reach.
Description
Zhijiang ZJ-225 Neutral Silicone Sealants is a one-part, medial modulus, neutral curing sealant. It has an excellent adhesive ability to most construction materials without a primer. Characteristic
a. Can be easily used and extruded any time.
b. Excellent contact change and extrusion ability, in any air temperature( -40℃ to 100℃) can extrude easily.
c. Excellent adhesion to stone, ceramics, concrete, and other building materials. It has no pollution to porous materials.
d. Outstanding weatherproofing ability, resisting to ultraviolet ray, ozone.
e. Be compatible with all kinds of silicone structural sealant. Use limitations
ZJ-225 is not fit for structural usage. It should NOT be applied in the following conditions:
a. To all materials that bleed oils, plasticizers or solvents, and green or partially sulfur zed gaskets or tapes, etc.
b. In totally confined space (Silicone sealant need the water in the air to cure)
c. For continuous immersion in water or below-grade applications all the year.
d. To painted surfaces, may cause seal failure as the paint cracking or paint stripping
e. To frost or wet surfaces
f. Surface touch the food directly
g. Easily suffer mechanical clash Typical properties (for reference)
The following data is for reference, is not suggested to make standard.
GB/T1___Chinese national standard
Where to useZJ-225 is fit for sealing all kinds of glass doors and windows. Colors
ZJ-225 is available 4 standard colors: white, black, grey, brown. Packaging
ZJ-225 is available in net 300ml plastic cartridges, 24 cartridges per carton,
And 500ml aluminum sausage, 20 sausages per carton. Storage and usable life
When stored under dry and airy, 27℃ or lower temperature conditions in the original unopened container.ZJ-225 has a shelf life of 9 months from the date of manufacture。 Specifications
JC/T881-2001 12.5E; GB/T14863-2003 12.5E。 Material feature
ZJ-225 can keep good viscous degree and can easily extrude at -25℃ to 50℃. Construction project technology service
It’s needed to take the design, choose materials, operation into consideration for the structural joint sealing. The technical communication between suppliers and applicants are necessary for the present situation: varied sealant types, daily changing materials and the compatibilities between surface treatment and materials. Hangzhou Zhijiang Silicone Chemicals Co., Ltd. gives construction project technical services as follows:
Adhesion Testing
ZHIJIANG Silicone will evaluate tests about the adhesion of our products to job site or representative job site materials in standard laboratory. Results of the adhesion testing, product recommendations and surface preparation will be forwarded in writing.
Compatibility Testing
Incompatibility of glazing materials can lead to sealant discoloration and/or loss of adhesion. To help protect against these problems and to ensure compatibility, ZHIJIANG will also test and provide information on the compatibility of accessory materials (gaskets, spacers, etc.) and other ZHIJIANG Silicone sealants.
Stain Testing
Because of the staining problems that may occur with porous substrates, ZHIJIANG is willing to run laboratory tests and provide information to you on the possibility of staining occurring with the construction materials being used. Weatherproofing joint design
Wider joints accommodate more movement than narrow joints. When ZJ-225 is being used for wide movement joint, a minimum depth of 6 mm and a maximum 12mm sealant/substrate bond is necessary to ensure adequate adhesion. A properly designed moving joint will have a 2:1 width to depth ratio.
The expansion and contraction of joints is mainly caused by season or daily temperature changes. The designed joint width is at least double estimated movement, better quadruple to remedy errors of materials and application. All size of joints should be gotten through calculation of joint movements, especially wider joint size necessary for plastic board with higher thermal expansion rations. Application
Surface clean
Cleaning all grease, dirty, water, klunky sealant from surface, accessories and protective coatings and any pollutant left inside joints and sunken parts.
Metal and glass should be cleaned by two-cloth. The solvent used will be methyl ethyl ketone, tolune or xylene and observe the using rule. If for plastic, use the guided solvent from suppliers.
Depending on the condition of the surface, porous substrates may require abrasion cleaning, solvent cleaning or both. Surface must keep dry and clean. Dirties and other impurities should be blew off by non-oily compressed air or gulfed by vacuum cleaner.
Priming
It’s commonly not necessary for priming on using zhijiang silicone sealant. If recommending primer after adhesion tests pour zhijiang primer to a clean, dry, lint-free cloth and gently wipe surface till a thin film formed. Later application.
Masking
Masking tape should be used to keep excess sealant from contacting adjacent areas where it is not intended, to ensure an aesthetically pleasing job. Tool the sealant with light pressure before a skin begins to form (typically 10 to 20 minutes). Remove the masking tape before the sealant skins over.
Backer materials
Generally, three common backer rod types can be used: Open-cell polyurethane, Closed-cell polyethylene, Non-gassing polyolefin. When a backer rod cannot be positioned in a joint opening, a Teflon or polyethylene tape should be used to prevent three-sided adhesion.
Application
Install backing material or joint fillers. Set blocks, shims and tapes. Cut the nozzle of ZJ-225 and fit into gun and make extrusion diameter fit for joint. Continuous extrude sealant into joint without air forming. Care must be taken to ensure complete fill of the sealant cavity. Tool the sealant with light pressure before a skin begins to form. Make sealant surface a sunken shape using raised tool. Not use soap water for assistant. Remove the masking tape after tooling. The sealant for bottom joints should be tooled into slope to protect water accumulation. The surface of sealant should be dry and frost-free. The uncured sealant is not permitted to contact with polished granite, metal or glass to preventing a thin film formed on the substrate surface to affect the esthetic things. Use masking tape. If sealant contact with non-porous material, clean out with methyl ethyl ketone, tolune or xylene.
Sealant repair
If a sealant has failed, it is good practice to understand why it failed and decide which measure to take. To see:
Whether aging of original sealant; Joint movement over the bearing ability for sealant; Adhesion loss or incompatibility between sealant and joint material; Thickness not proper of sealant; Others. Handling precautions
This paper doesn’t include MSDS for product. It should be notified:
1. Not contact sealant with food or cosmetics;
2. Not contact skin for long time about uncured sealant;
3. Rinse eyes with large quantities of water and seek medical check if sealant drops into eyes.
4. Not put sealant at children’s reach.
Types： Silicone sealant
Product number： ZJ-666
Product Name： Mildew Proofing Neutral Silicone Sealant
Number ： 958
Product Introduction ：
Description
ZJ-666 Neutral Silicone mildew proofing Sealant is a one part, neutral curing sealant specifically designed for the sealing of sanitary fittings, including baths, showers, sinks, urinals and ceramic tile joints. It is mildew and fungus resistant. Characteristic
a. Can be easily used and extruded any time.
b. Superior mildew-proofing, keep pleasing to the eyes and sanitary in conditions of dark and high humidity.
c. Excellent contact change and extrusion ability, in any air temperature (-40℃ to 100℃) can extrude easily.
d. Excellent adhesion to most building materials.
e. Outstanding weatherproofing ability, Excellent tensile and compression restoring ability.
F. Neutral curing, no corrosive to stone, ceramics, concrete, metal and glazing glass, etc. Over come the weakness of acetic sealants (normal glass sealants) erodes the materials. Where to use
ZJ-666 is fit for fixing up and sealing all kinds of kitchen utensil and sanitary equipment with weatherproofing and mildew proofing, like baths, showers, sinks, urinals and ceramic tile joints. Joint sealing to glass, marble and aluminum plate curtain wall; Fix up all kinds of glass door and window; Application for automotive, ship, packaging advertisement and family decoration. Use limitations
ZJ-666 is not fit for structural usage. It should NOT be applied in the following conditions:
a. To all materials that bleed oils, plasticizers or solvents, and green or partially sulfur zed gaskets or tapes, etc.
b. In totally confined space (Silicone sealant need the water in the air to cure)
c. For continuous immersion in water or below-grade applications all the year.
d. To painted surfaces, may cause seal failure as the paint cracking or paint stripping
e. To frost laden or wet surfaces
f. Surface touch the food directly
g. Easily suffer mechanical clash Typical properties (for reference)
The following data is for reference, is not suggested to make standard 
ZJ-666 can keep good viscous degree and can easily extrude at -25 to 50℃; it has an excellent compatibility with reflect glass, doubling glass, silicone hollow glass, acrylic acid, polythene and etc. Colors
ZJ-666 is available in four standard colors: white, black, and grey, brown. We can also supply the other color according to the customer’s requirement. Specifications
JC/T885-2001 25HM; and GB/T1741-1989 mildew Proofing grade 0. Packing
300ml plastic cartridges, 24 cartridges per carton. Storage and usable life
When stored under dry and airy, 27℃ or lower temperature conditions in the original unopened container, ZJ-666 has a shelf life of 12 months from the date of manufacture. Construction project technology service
It’s needed to take the design, choose materials, operation into consideration for the structural joint sealing. The technical communication between suppliers and applicants are necessary for the present situation: varied sealant types, daily changing materials and the compatibilities between surface treatment and materials. Hangzhou Zhijiang Silicone Chemicals Co., Ltd. gives construction project technical services as follows:
Adhesion Testing
ZHIJIANG Silicone will evaluate tests about the adhesion of our products to job site or representative job site materials in standard laboratory. Results of the adhesion testing, product recommendations and surface preparation will be forwarded in writing.
Compatibility Testing
Incompatibility of glazing materials can lead to sealant discoloration and/or loss of adhesion. To help protect against these problems and to ensure compatibility, ZHIJIANG will also test and provide information on the compatibility of accessory materials (gaskets, spacers, etc.) and other ZHIJIANG Silicone sealants.
Stain Testing
Because of the staining problems that may occur with porous substrates, ZHIJIANG is willing to run laboratory tests and provide information to you on the possibility of staining occurring with the construction materials being used. Weatherproofing joint design
Wider joints accommodate more movement than narrow joints. When ZJ-666 is being used for wide movement joint, a minimum depth of 6 mm and a maximum 12mm sealant/substrate bond is necessary to ensure adequate adhesion. A properly designed moving joint will have a 2:1 width to depth ratio.
The expansion and contraction of joints is mainly caused by season or daily temperature changes. The designed joint width is at least double estimated movement, better quadruple to remedy errors of materials and application. All size of joints should be gotten through calculation of joint movements, especially wider joint size necessary for plastic board with higher thermal expansion rations. Application
Surface clean
Cleaning all grease, dirty, water, klunky sealant from surface, accessories and protective coatings and any pollutant left inside joints and sunken parts.
Metal and glass should be cleaned by two-cloth. The solvent used will be methyl ethyl ketone, tolune or xylene and observe the using rule. If for plastic, use the guided solvent from suppliers.
Depending on the condition of the surface, porous substrates may require abrasion cleaning, solvent cleaning or both. Surface must keep dry and clean. Dirties and other impurities should be blew off by non-oily compressed air or gulfed by vacuum cleaner.
Priming
It’s commonly not necessary for priming on using zhijiang silicone sealant. If recommending primer after adhesion tests pour zhijiang primer to a clean, dry, lint-free cloth and gently wipe surface till a thin film formed. Later application.
Masking
Masking tape should be used to keep excess sealant from contacting adjacent areas where it is not intended, to ensure an aesthetically pleasing job. Tool the sealant with light pressure before a skin begins to form (typically 10 to 20 minutes). Remove the masking tape before the sealant skins over.
Backer materials
Generally, three common backer rod types can be used: Open-cell polyurethane, Closed-cell polyethylene, Non-gassing polyolefin. When a backer rod cannot be positioned in a joint opening, a Teflon or polyethylene tape should be used to prevent three-sided adhesion.
Application
Install backing material or joint fillers. Set blocks, shims and tapes. Cut the nozzle of ZJ-666 and fit into gun and make extrusion diameter fit for joint. Continuous extrude sealant into joint without air forming. Care must be taken to ensure complete fill of the sealant cavity. Tool the sealant with light pressure before a skin begins to form. Make sealant surface a sunken shape using raised tool. Not use soap water for assistant. Remove the masking tape after tooling. The sealant for bottom joints should be tooled into slope to protect water accumulation. The surface of sealant should be dry and frost-free. The uncured sealant is not permitted to contact with polished granite, metal or glass to preventing a thin film formed on the substrate surface to affect the esthetic things. Use masking tape. If sealant contact with non-porous material, clean out with methyl ethyl ketone, tolune or xylene.
Sealant repair
If a sealant has failed, it is good practice to understand why it failed and decide which measure to take. To see:Whether aging of original sealant;Joint movement over the bearing ability for sealant;
Adhesion loss or incompatibility between sealant and joint material;Thickness not proper of sealant;Others. Handling precautions
This paper doesn’t include MSDS for product. It should be notified:
1. Not contact sealant with food or cosmetics;
2. Not contact skin for long time about uncured sealant;
3. Rinse eyes with large quantities of water and seek medical check if sealant drops into eyes.
4. Not put sealant at children’s reach.
Description
ZJ-666 Neutral Silicone mildew proofing Sealant is a one part, neutral curing sealant specifically designed for the sealing of sanitary fittings, including baths, showers, sinks, urinals and ceramic tile joints. It is mildew and fungus resistant. Characteristic
a. Can be easily used and extruded any time.
b. Superior mildew-proofing, keep pleasing to the eyes and sanitary in conditions of dark and high humidity.
c. Excellent contact change and extrusion ability, in any air temperature (-40℃ to 100℃) can extrude easily.
d. Excellent adhesion to most building materials.
e. Outstanding weatherproofing ability, Excellent tensile and compression restoring ability.
F. Neutral curing, no corrosive to stone, ceramics, concrete, metal and glazing glass, etc. Over come the weakness of acetic sealants (normal glass sealants) erodes the materials. Where to use
ZJ-666 is fit for fixing up and sealing all kinds of kitchen utensil and sanitary equipment with weatherproofing and mildew proofing, like baths, showers, sinks, urinals and ceramic tile joints. Joint sealing to glass, marble and aluminum plate curtain wall; Fix up all kinds of glass door and window; Application for automotive, ship, packaging advertisement and family decoration. Use limitations
ZJ-666 is not fit for structural usage. It should NOT be applied in the following conditions:
a. To all materials that bleed oils, plasticizers or solvents, and green or partially sulfur zed gaskets or tapes, etc.
b. In totally confined space (Silicone sealant need the water in the air to cure)
c. For continuous immersion in water or below-grade applications all the year.
d. To painted surfaces, may cause seal failure as the paint cracking or paint stripping
e. To frost laden or wet surfaces
f. Surface touch the food directly
g. Easily suffer mechanical clash Typical properties (for reference)
The following data is for reference, is not suggested to make standard
GB/T1___Chinese national standard
Material featureZJ-666 can keep good viscous degree and can easily extrude at -25 to 50℃; it has an excellent compatibility with reflect glass, doubling glass, silicone hollow glass, acrylic acid, polythene and etc. Colors
ZJ-666 is available in four standard colors: white, black, and grey, brown. We can also supply the other color according to the customer’s requirement. Specifications
JC/T885-2001 25HM; and GB/T1741-1989 mildew Proofing grade 0. Packing
300ml plastic cartridges, 24 cartridges per carton. Storage and usable life
When stored under dry and airy, 27℃ or lower temperature conditions in the original unopened container, ZJ-666 has a shelf life of 12 months from the date of manufacture. Construction project technology service
It’s needed to take the design, choose materials, operation into consideration for the structural joint sealing. The technical communication between suppliers and applicants are necessary for the present situation: varied sealant types, daily changing materials and the compatibilities between surface treatment and materials. Hangzhou Zhijiang Silicone Chemicals Co., Ltd. gives construction project technical services as follows:
Adhesion Testing
ZHIJIANG Silicone will evaluate tests about the adhesion of our products to job site or representative job site materials in standard laboratory. Results of the adhesion testing, product recommendations and surface preparation will be forwarded in writing.
Compatibility Testing
Incompatibility of glazing materials can lead to sealant discoloration and/or loss of adhesion. To help protect against these problems and to ensure compatibility, ZHIJIANG will also test and provide information on the compatibility of accessory materials (gaskets, spacers, etc.) and other ZHIJIANG Silicone sealants.
Stain Testing
Because of the staining problems that may occur with porous substrates, ZHIJIANG is willing to run laboratory tests and provide information to you on the possibility of staining occurring with the construction materials being used. Weatherproofing joint design
Wider joints accommodate more movement than narrow joints. When ZJ-666 is being used for wide movement joint, a minimum depth of 6 mm and a maximum 12mm sealant/substrate bond is necessary to ensure adequate adhesion. A properly designed moving joint will have a 2:1 width to depth ratio.
The expansion and contraction of joints is mainly caused by season or daily temperature changes. The designed joint width is at least double estimated movement, better quadruple to remedy errors of materials and application. All size of joints should be gotten through calculation of joint movements, especially wider joint size necessary for plastic board with higher thermal expansion rations. Application
Surface clean
Cleaning all grease, dirty, water, klunky sealant from surface, accessories and protective coatings and any pollutant left inside joints and sunken parts.
Metal and glass should be cleaned by two-cloth. The solvent used will be methyl ethyl ketone, tolune or xylene and observe the using rule. If for plastic, use the guided solvent from suppliers.
Depending on the condition of the surface, porous substrates may require abrasion cleaning, solvent cleaning or both. Surface must keep dry and clean. Dirties and other impurities should be blew off by non-oily compressed air or gulfed by vacuum cleaner.
Priming
It’s commonly not necessary for priming on using zhijiang silicone sealant. If recommending primer after adhesion tests pour zhijiang primer to a clean, dry, lint-free cloth and gently wipe surface till a thin film formed. Later application.
Masking
Masking tape should be used to keep excess sealant from contacting adjacent areas where it is not intended, to ensure an aesthetically pleasing job. Tool the sealant with light pressure before a skin begins to form (typically 10 to 20 minutes). Remove the masking tape before the sealant skins over.
Backer materials
Generally, three common backer rod types can be used: Open-cell polyurethane, Closed-cell polyethylene, Non-gassing polyolefin. When a backer rod cannot be positioned in a joint opening, a Teflon or polyethylene tape should be used to prevent three-sided adhesion.
Application
Install backing material or joint fillers. Set blocks, shims and tapes. Cut the nozzle of ZJ-666 and fit into gun and make extrusion diameter fit for joint. Continuous extrude sealant into joint without air forming. Care must be taken to ensure complete fill of the sealant cavity. Tool the sealant with light pressure before a skin begins to form. Make sealant surface a sunken shape using raised tool. Not use soap water for assistant. Remove the masking tape after tooling. The sealant for bottom joints should be tooled into slope to protect water accumulation. The surface of sealant should be dry and frost-free. The uncured sealant is not permitted to contact with polished granite, metal or glass to preventing a thin film formed on the substrate surface to affect the esthetic things. Use masking tape. If sealant contact with non-porous material, clean out with methyl ethyl ketone, tolune or xylene.
Sealant repair
If a sealant has failed, it is good practice to understand why it failed and decide which measure to take. To see:Whether aging of original sealant;Joint movement over the bearing ability for sealant;
Adhesion loss or incompatibility between sealant and joint material;Thickness not proper of sealant;Others. Handling precautions
This paper doesn’t include MSDS for product. It should be notified:
1. Not contact sealant with food or cosmetics;
2. Not contact skin for long time about uncured sealant;
3. Rinse eyes with large quantities of water and seek medical check if sealant drops into eyes.
4. Not put sealant at children’s reach.
Types： Polysulphide sealant
Product number： ZJ-998
Product Name： Polysulphide Sealant for Insulating Glass
Number ： 1311
Product Introduction ：
Description
It is a kind of two-part room temperature vulcanized polysulphide sealant with high performance especially formulated for insulating glass. This sealant has excellent elasticity, heat gas penetration and adherent stability to various glasses. Insulating glass is a kind of energy-efficient material with various functions of soundproof, heat-resistant, anti-frost, and anti-fume, etc. It is widely used as the wind shields in construction, trains automobiles and the door glasses in refrigerators and freezing cabins. The property of ZJ-998 is certificated by JC/T 486 -2001standard《elastic sealant for insulating glass》.
The product manufactured by ZHIJIANG ZJ-998 is certificated by GB/T11944-2002 standard – 《Insulating glass》. Where to use
ZJ-998 Polysulphide sealant is specially designed for insulating glass. Application
1. Two parts of ZHIJIANG ZJ-998 packaged respectively of composition A (basic gel) and composition B (curing agent), are mixed together according to the ratio of A: B=10: 1 before application. The curing rate may be modulated by changing the weight ratio of composition A to composition B over the range of 12:1 to 8:1 according to different environment conditions. 2. The mixture of sealant can be classified into two methods, one by hand-made and the other by special extrusion machine. It is noticed that ZHIJIANG ZJ-998 sealant should be scratched and mixed by the spatula along the same direction repeatedly to prevent gas bubble trapped in sealant in the method of hand-made. The homogeneity of mixture can be measured by butterfly-type method as listed in the following figure:
Description
It is a kind of two-part room temperature vulcanized polysulphide sealant with high performance especially formulated for insulating glass. This sealant has excellent elasticity, heat gas penetration and adherent stability to various glasses. Insulating glass is a kind of energy-efficient material with various functions of soundproof, heat-resistant, anti-frost, and anti-fume, etc. It is widely used as the wind shields in construction, trains automobiles and the door glasses in refrigerators and freezing cabins. The property of ZJ-998 is certificated by JC/T 486 -2001standard《elastic sealant for insulating glass》.
The product manufactured by ZHIJIANG ZJ-998 is certificated by GB/T11944-2002 standard – 《Insulating glass》. Where to use
ZJ-998 Polysulphide sealant is specially designed for insulating glass. Application
1. Two parts of ZHIJIANG ZJ-998 packaged respectively of composition A (basic gel) and composition B (curing agent), are mixed together according to the ratio of A: B=10: 1 before application. The curing rate may be modulated by changing the weight ratio of composition A to composition B over the range of 12:1 to 8:1 according to different environment conditions. 2. The mixture of sealant can be classified into two methods, one by hand-made and the other by special extrusion machine. It is noticed that ZHIJIANG ZJ-998 sealant should be scratched and mixed by the spatula along the same direction repeatedly to prevent gas bubble trapped in sealant in the method of hand-made. The homogeneity of mixture can be measured by butterfly-type method as listed in the following figure:
3. The surfaces of insulating glasses must be dry and clean.
4. ZHIJIANG ZJ-998 should fill the joints completely which need to be caulked during the course of making insulating glass.
5. Gun mouth should be assured to move along the same direction at uniform velocity to make the joints full of sealant and prevent the gas bubble production due to moving too fast or back and forth in the method of using special extrusion machine.
6. The sealant overflowing the joints should be pressed back at once by spatula to make the sealant contacting with the sides of the joints completely and smooth the surface of the joints along the same direction.
Main Technical Properties (Only for Reference)
GB/T1___Chinese national standard
Packing
ZJ-998 Polysulphide sealant is available as:
Packing 1: Component A: 300kg/ steel drum Component B: 30kg/ steel drum
Packing 2: Component A: 30kg/ steel drum Component B: 3kg/plastic pail Shelf Life Storage
When stored at or below 27℃ in the original unopened containers, this product has a shelf life of 12 months from the date of production. Precautions
Avoid direct contact with food and cosmetic.
Avoid prolonged skin contact with uncured sealant.
The uncured sealant should not contact with eyes and mouth. If sealant gets into eyes, flush with water. See physician if necessary.
Ensure good ventilation if used indoor.
Keep out of reach of Children.
ZJ-998 Polysulphide sealant is available as:
Packing 1: Component A: 300kg/ steel drum Component B: 30kg/ steel drum
Packing 2: Component A: 30kg/ steel drum Component B: 3kg/plastic pail Shelf Life Storage
When stored at or below 27℃ in the original unopened containers, this product has a shelf life of 12 months from the date of production. Precautions
Avoid direct contact with food and cosmetic.
Avoid prolonged skin contact with uncured sealant.
The uncured sealant should not contact with eyes and mouth. If sealant gets into eyes, flush with water. See physician if necessary.
Ensure good ventilation if used indoor.
Keep out of reach of Children.
Types： Butyl sealant
Product number： ZJ-301
Product Name： Butyl Sealant for Insulating Glass Primary Seal
Number ： 1153
Product Introduction ：
Description
ZJ-301 is a one-part, solvent-free, fog-free, unsulfurized, permanent plastic first sealant based on polyisobutyl for insulating glass. JS-301 keeps plastic and sealing over a wide temperature range and not crack and harden for sealant surface. It has good adhesion to glass, aluminum alloy, zinc plating steel, stainless steel and etc. It could form an excellent humid proof system with elastic sealant. Where to use
ZJ-301 is mainly used for insulating glass together with zhijiang’s ZJ-998 two-part polysulfide and ZJ-8000 two-part silicone structural sealant, or ZJ-997 two-part silicone sealant for insulating glass to finish two layer seal. Application
Clean and dry adhesion surface to get rid of dirty, oily things. ZJ-301 is applied by special hot-melt butyl extrusion machine. The extrusion condition could be satisfied through temperature and pressure adjustment, for example temperature could be adjusted over the range of 100℃～130℃. The environment temperature should not be lower than 10℃ in application. Typical properties (for reference) 
ZJ-301 conforms to JC/T 914-2003 Packing
This product should be packed by paper container:
Packing1: 7kg/ barrel (diameter 190mm, height 301mm)
Packing2: 6kg/ barrel (diameter 174mm, height 255mm)
Packing3: 3kg/ barrel (diameter 140mm, height 200mm)
Packing4:200kg/drum(diameter 568mm) We supply it according to customer requires. Storage: -10℃～35℃, shelf life of 24 months
ZJ-301 is not dangerous products and could be transported by train, automobile, ship and airplane.
Notes:
The relative parameter, especially the application hints, is proposed based on testing and experiments. We don’t recommend this document as customer’s not necessary to do testing for our product due to different material and application conditions. If necessary, please contact our technical service team.
Description
ZJ-301 is a one-part, solvent-free, fog-free, unsulfurized, permanent plastic first sealant based on polyisobutyl for insulating glass. JS-301 keeps plastic and sealing over a wide temperature range and not crack and harden for sealant surface. It has good adhesion to glass, aluminum alloy, zinc plating steel, stainless steel and etc. It could form an excellent humid proof system with elastic sealant. Where to use
ZJ-301 is mainly used for insulating glass together with zhijiang’s ZJ-998 two-part polysulfide and ZJ-8000 two-part silicone structural sealant, or ZJ-997 two-part silicone sealant for insulating glass to finish two layer seal. Application
Clean and dry adhesion surface to get rid of dirty, oily things. ZJ-301 is applied by special hot-melt butyl extrusion machine. The extrusion condition could be satisfied through temperature and pressure adjustment, for example temperature could be adjusted over the range of 100℃～130℃. The environment temperature should not be lower than 10℃ in application. Typical properties (for reference)
GB/T1___Chinese national standard
StandardZJ-301 conforms to JC/T 914-2003 Packing
This product should be packed by paper container:
Packing1: 7kg/ barrel (diameter 190mm, height 301mm)
Packing2: 6kg/ barrel (diameter 174mm, height 255mm)
Packing3: 3kg/ barrel (diameter 140mm, height 200mm)
Packing4:200kg/drum(diameter 568mm) We supply it according to customer requires. Storage: -10℃～35℃, shelf life of 24 months
ZJ-301 is not dangerous products and could be transported by train, automobile, ship and airplane.
Notes:
The relative parameter, especially the application hints, is proposed based on testing and experiments. We don’t recommend this document as customer’s not necessary to do testing for our product due to different material and application conditions. If necessary, please contact our technical service team.
Types： Polyurethane sealant
Product number： ZJ-311
Product Name： Polyurethane Sealant for Windshield Glazing
Number ： 894
Product Introduction ：
Description
ZJ-311 is one-part room temperature curing polyurethane adhesive with good adhesion property. It reacts with moisture in the air to form a kind of elstomer with high strength, aging resistant, vibration exhaustion resistant, low temperature resistant and corrosive resistant properties. Where to use
Direct glazing and sealing for windshield glazing, glass fiber reinforced plastic fittings, installation in automotive, accessory, auto steel and aluminum board. Characteristic
a. Room temperature curing, no sagging
b. Good adhesion strength, wide application range for base materials
c. Good chemical corrosion resistance and excellent weather proof
d. Excellent aging resistant property
e. Excellent noise, vibration and impaction resistant
f. Good damp resistant and anti mildew
g. Paint able, abrasion able
Technical Data (for reference) 
At 5℃~25℃ shady, dry place, 6 months of shelf life. Technical Service
Full support for customer in Technology Application
Surface preparation
Clean all dirty, dust, loose particles by steel brush and clean all oily things with cleaning agent. All former adhesive must be cleaned out by scraping, paring, friction, jet of strong air or suitable ways.
Priming
Primers may be required to achieve optimal adhesion. Smooth priming base and no permitting primer clump and uniformly disperse to prevent any coating cumulus.
Mixture
ZJ-311 doesn’t need mixing and use directly.
Spreading
Spread ZJ-311 on base material with enough pressure and thickness not less than 1 millimeter. Note
Full cure (dry 7 days under 20℃) for ZJ-311 should be finished before applied place permits water entering into. The adhesive surface could be painted but no recommendation for solvent based paints such as colorful enamel. If should be used, please do in site testing to prove compatibility.
No permission for wet spreading tech. NO recommendation solvent, water, cleaner or soap solution.
No permission for high chloride content disinfected area like swimming pool before consulting Zhijiang’s technician.
Application temperature is between 5 ℃ and 35 ℃. Paintable Property
ZJ-311 could be painted after dry with traditional method like epoxy or acrylic paints. The adhesive surface will take place reaction and soften if using high solvent content coating like luster enamel or high oily base coatings.
Coating should have similar tensile strength compared with adhesive in order to get best appearance and property. Painting could be processed after 24 hours if thickness of adhesive is less than 3 mm while painted after 48 hours if thickness more than 3mm. Anti Fire
ZJ-311 is not easy inflammable.
Health and Safety
No contact with eye or skin. Please contact doctor or poisoning preventing center in case of poisoning. If contact with skin, clean thoroughly 15 minutes long or look for doctor. Pretest Process
Zhijiang will sample all related material and do testing to decide best adhesive type and best performance to preventing any potential problems. Please ask for Zhijiang’s technician for more specifics.
Description
ZJ-311 is one-part room temperature curing polyurethane adhesive with good adhesion property. It reacts with moisture in the air to form a kind of elstomer with high strength, aging resistant, vibration exhaustion resistant, low temperature resistant and corrosive resistant properties. Where to use
Direct glazing and sealing for windshield glazing, glass fiber reinforced plastic fittings, installation in automotive, accessory, auto steel and aluminum board. Characteristic
a. Room temperature curing, no sagging
b. Good adhesion strength, wide application range for base materials
c. Good chemical corrosion resistance and excellent weather proof
d. Excellent aging resistant property
e. Excellent noise, vibration and impaction resistant
f. Good damp resistant and anti mildew
g. Paint able, abrasion able
Technical Data (for reference)
Packaging
300ml aluminum cartridge, 12 cartridges /carton
400ml and 600ml sausage, 20 sausages /carton
At 5℃~25℃ shady, dry place, 6 months of shelf life. Technical Service
Full support for customer in Technology Application
Surface preparation
Clean all dirty, dust, loose particles by steel brush and clean all oily things with cleaning agent. All former adhesive must be cleaned out by scraping, paring, friction, jet of strong air or suitable ways.
Priming
Primers may be required to achieve optimal adhesion. Smooth priming base and no permitting primer clump and uniformly disperse to prevent any coating cumulus.
Mixture
ZJ-311 doesn’t need mixing and use directly.
Spreading
Spread ZJ-311 on base material with enough pressure and thickness not less than 1 millimeter. Note
Full cure (dry 7 days under 20℃) for ZJ-311 should be finished before applied place permits water entering into. The adhesive surface could be painted but no recommendation for solvent based paints such as colorful enamel. If should be used, please do in site testing to prove compatibility.
No permission for wet spreading tech. NO recommendation solvent, water, cleaner or soap solution.
No permission for high chloride content disinfected area like swimming pool before consulting Zhijiang’s technician.
Application temperature is between 5 ℃ and 35 ℃. Paintable Property
ZJ-311 could be painted after dry with traditional method like epoxy or acrylic paints. The adhesive surface will take place reaction and soften if using high solvent content coating like luster enamel or high oily base coatings.
Coating should have similar tensile strength compared with adhesive in order to get best appearance and property. Painting could be processed after 24 hours if thickness of adhesive is less than 3 mm while painted after 48 hours if thickness more than 3mm. Anti Fire
ZJ-311 is not easy inflammable.
Health and Safety
No contact with eye or skin. Please contact doctor or poisoning preventing center in case of poisoning. If contact with skin, clean thoroughly 15 minutes long or look for doctor. Pretest Process
Zhijiang will sample all related material and do testing to decide best adhesive type and best performance to preventing any potential problems. Please ask for Zhijiang’s technician for more specifics.
Types： Others
Product number： JS-201
Product Name： JS-201 Anchor Adhesive for Construction Structure (General Type)
Number ： 899
Product Introduction ：
Description
This product is a new type of two-part anchor adhesive for construction structure (JS-201, also named strong type). The adhesive has the advantages of fast-cure, high-strength, great anchor force and medium resistant as adhesion tovarious substrates (concrete, stone materials, brick, rock etc.) and metal anchor stick, and so is widely used in anchor stick fixture of concrete, stone materials, brick, rockas well as adhesion to other building assemblies. Characteristic
1. This product is two-part fast cure anchor adhesive for construction structure at room temperature.
2. This product has excellent properties of bearing promptly the loads imposed on construction structures; strong adhesion and great anti pull force.
3.Operations can be made conveniently over the wide temperature rangs of-10℃~40℃ with good technological property.
4. This product is a rind of adhesive of water-resistant, medium-resistant and anti damp with good seal.
5. The application field of this product is various, such as adhesion to concrete, stone material, marbles and metals. Where to use
1. Anchor-fixture for bases of various equipments.
2. Plantation of reinforcing bar and anchor-fixture of anchor bolt in various construction structures.
3. Protective support provided by anchor-fixture to domes and walls of mine corridor.
4. Anchor-fixture of railway and rails and insulated anchor-fixture of rails.
5. Anchor-fixture of installation of curtain wall and chemical equipment, pipeline and billboard.
6. Various anchor-fixture in the projects of hydraulic equipment, dock, road, and bridge construction. Main Technical Properties(Only for Reference)
Items Conditions Main lndex Reference Measurement
Standard
Steel-steel
shear strength 25℃,72h ≥12MPa GB7124
Anchor force Φ12thread steel， Technical codes of
10times of diameter deep ≥40KN building anchor bolt
Anchor force Φ12thread steel， Reinforced Technical codes of
15times of diameter deep bar Break building anchor bolt
Description
This product is a new type of two-part anchor adhesive for construction structure (JS-201, also named strong type). The adhesive has the advantages of fast-cure, high-strength, great anchor force and medium resistant as adhesion tovarious substrates (concrete, stone materials, brick, rock etc.) and metal anchor stick, and so is widely used in anchor stick fixture of concrete, stone materials, brick, rockas well as adhesion to other building assemblies. Characteristic
1. This product is two-part fast cure anchor adhesive for construction structure at room temperature.
2. This product has excellent properties of bearing promptly the loads imposed on construction structures; strong adhesion and great anti pull force.
3.Operations can be made conveniently over the wide temperature rangs of-10℃~40℃ with good technological property.
4. This product is a rind of adhesive of water-resistant, medium-resistant and anti damp with good seal.
5. The application field of this product is various, such as adhesion to concrete, stone material, marbles and metals. Where to use
1. Anchor-fixture for bases of various equipments.
2. Plantation of reinforcing bar and anchor-fixture of anchor bolt in various construction structures.
3. Protective support provided by anchor-fixture to domes and walls of mine corridor.
4. Anchor-fixture of railway and rails and insulated anchor-fixture of rails.
5. Anchor-fixture of installation of curtain wall and chemical equipment, pipeline and billboard.
6. Various anchor-fixture in the projects of hydraulic equipment, dock, road, and bridge construction. Main Technical Properties(Only for Reference)
Items Conditions Main lndex Reference Measurement
Standard
Steel-steel
shear strength 25℃,72h ≥12MPa GB7124
Anchor force Φ12thread steel， Technical codes of
10times of diameter deep ≥40KN building anchor bolt
Anchor force Φ12thread steel， Reinforced Technical codes of
15times of diameter deep bar Break building anchor bolt
Application method
1.Drill: Form holes of desirable diameter and depth with impact drill.
2.Clean dirty: Blow away the floating dirty in holes with compressed air.
3.Mixture: Stir uniformly in the package of composition A and weigh the compositions according to the ration of A:B=100:3
4.Fill anchor adhesive: Imject the: mixture into holes without air bubble.
5.Anchor-fixture: Plant the anchor-stick (or reinforcing bar) in the holes and erase surplus adhesive.
6.Curing :Cure no less than 8 hours at the room temperature after plant the anchor-stick vertically. Packaging
Two kinds:
One：Composition A 1Kg，Composition B 50g；
Anther：Composition A 10Kg，Composition B 500g(250×2)． Noticeitems
1.This product should be stored in the shady, dry and good ventilation warehouse with 3 months of shelf time commonly.
2.Don’t compound too much adhesive, properly compound as use.
3.Clean hands with acetone firstly and then wash with water as this product contacts with your skins.
1.Drill: Form holes of desirable diameter and depth with impact drill.
2.Clean dirty: Blow away the floating dirty in holes with compressed air.
3.Mixture: Stir uniformly in the package of composition A and weigh the compositions according to the ration of A:B=100:3
4.Fill anchor adhesive: Imject the: mixture into holes without air bubble.
5.Anchor-fixture: Plant the anchor-stick (or reinforcing bar) in the holes and erase surplus adhesive.
6.Curing :Cure no less than 8 hours at the room temperature after plant the anchor-stick vertically. Packaging
Two kinds:
One：Composition A 1Kg，Composition B 50g；
Anther：Composition A 10Kg，Composition B 500g(250×2)． Noticeitems
1.This product should be stored in the shady, dry and good ventilation warehouse with 3 months of shelf time commonly.
2.Don’t compound too much adhesive, properly compound as use.
3.Clean hands with acetone firstly and then wash with water as this product contacts with your skins.
Types： New Products
Product number： ZJ-588
Product Name： Silicone Gasket Sealant（THIXOTROPIC and SAGING）
Number ： 844
Product Introduction ：
Description
Zhijiang ZJ-588 Silicone Gasket Sealant is one component, room temperature vulcanization silicone sealant, It easily extrudes in a wide rang weather condition and quickly cures at room temperature by reaction with moisture in the air to form a excellent , durable, flexible silicone rubber seal.
ZJ-588 has good characters of fast vulcanization under room temperature, thixotropic, no flowing, good aging resistance, good oil, water, diluted acid, diluted alkali resistance, high and low temperature resistance. The sealant can be used at -60℃—250℃, with good sealing ability, antiknock characteristics and shock resistance. Characteristic
A、Can be easily used and extruded any time.
B、room temperature curing for engine and gear-box.
C、Excellent and high resistant to weathering and UV exposure, oil, water, air and high and low temperature
D、Excellent adhesion to most steel materials. Where to use
ZJ-588 is especially designed for sealing and bonding for automobile. It is one part, neutral curing adhesion, can be widely used gas engine, automobile, gear case, compressor, many kinds of machine tools, and it has good adhesion to water, gas, oil and etc. It also has good seep resistance and adhesion to of urn cover of gas engine, valve covers, screw thread which has bottom rind and high voltage oil pipe, gear-box, front and back end cover of petrolic, the cover of adjust temperature machine ,oil pump, water pump and so on. It will prolong the using life of machine. Technical index (for reference) 
ZJ-588 has a good adhesion under -25～50℃,extrude easily. After curing under -50～200℃, it keeps excellent flexibility, good oil, gas, water resistance and good elongation percentage. And also it has high quality sealing for engine and gear-box, good thixotropic, no corrosive, and safe and so on. Packing
Net weight: 85g, 100g in aluminum toothpaste pipe or 300 ml plastic cartridge. Also we can base on your require to produce. Color
Four general color: Black, white, grey, iron red. Also we can supply another colors basing on your require. Storage and expiry of validity
Store in a cool, dry , airiness place, at a temperature under 27℃ or lower temperature conditions in the original unopened container. It has a shelf life of 12 months from the date of manufacture. Produce measure up standard
Chinese engine industry standard of《 liquid sealant 》JB/T4254-1999 Notice
This product specification doesn’t include the information for using product safely. Please pay attention to this notice.
1) Keep children, food, cosmetic away-from it
2) Avoid your skin touching sealant for long time, in case of eye contact, flush with water or see a doctor. Color:
Black, white, grey, iron red and the other colors base on customer’s requirement.
Packing
Net weight: 85g, 100g in aluminium toothpaste pipe
300 ml plastic cartridge.
Also we can base on your require to produce.
Description
Zhijiang ZJ-588 Silicone Gasket Sealant is one component, room temperature vulcanization silicone sealant, It easily extrudes in a wide rang weather condition and quickly cures at room temperature by reaction with moisture in the air to form a excellent , durable, flexible silicone rubber seal.
ZJ-588 has good characters of fast vulcanization under room temperature, thixotropic, no flowing, good aging resistance, good oil, water, diluted acid, diluted alkali resistance, high and low temperature resistance. The sealant can be used at -60℃—250℃, with good sealing ability, antiknock characteristics and shock resistance. Characteristic
A、Can be easily used and extruded any time.
B、room temperature curing for engine and gear-box.
C、Excellent and high resistant to weathering and UV exposure, oil, water, air and high and low temperature
D、Excellent adhesion to most steel materials. Where to use
ZJ-588 is especially designed for sealing and bonding for automobile. It is one part, neutral curing adhesion, can be widely used gas engine, automobile, gear case, compressor, many kinds of machine tools, and it has good adhesion to water, gas, oil and etc. It also has good seep resistance and adhesion to of urn cover of gas engine, valve covers, screw thread which has bottom rind and high voltage oil pipe, gear-box, front and back end cover of petrolic, the cover of adjust temperature machine ,oil pump, water pump and so on. It will prolong the using life of machine. Technical index (for reference)
Instructions:
1） Clean the stains on the joint surface such as oil, water, dust. Wait until they are dry.
2） Open the cartridge and attach nozzle to cartridge. Cut nozzle on desired size.
3) When bonding or sealing, the width of the sealant gap is at least 0.2 mm. Make sure get rid of all air in the gap.
4) When bonding or sealing, keep the sealant pipe at incline 45 degree. Extrude the sealant into the gap and the sealant will not flow down because of the deadweight.
5) Must extrude the sealant at require thickness in 10 minutes.
6) Curing time: Cured in one hour. Cured 3 mm/ 24 hours under room temperature fully cured in 7 days. There is a phenomenon of curing incompletely in northeast, northwest in winter, but it will not effect the using affection, just keep definite moisture is ok because the sealant is cured by absorbing minim moisture in the air.
ZJ-588 has a good adhesion under -25～50℃,extrude easily. After curing under -50～200℃, it keeps excellent flexibility, good oil, gas, water resistance and good elongation percentage. And also it has high quality sealing for engine and gear-box, good thixotropic, no corrosive, and safe and so on. Packing
Net weight: 85g, 100g in aluminum toothpaste pipe or 300 ml plastic cartridge. Also we can base on your require to produce. Color
Four general color: Black, white, grey, iron red. Also we can supply another colors basing on your require. Storage and expiry of validity
Store in a cool, dry , airiness place, at a temperature under 27℃ or lower temperature conditions in the original unopened container. It has a shelf life of 12 months from the date of manufacture. Produce measure up standard
Chinese engine industry standard of《 liquid sealant 》JB/T4254-1999 Notice
This product specification doesn’t include the information for using product safely. Please pay attention to this notice.
1) Keep children, food, cosmetic away-from it
2) Avoid your skin touching sealant for long time, in case of eye contact, flush with water or see a doctor. Color:
Black, white, grey, iron red and the other colors base on customer’s requirement.
Packing
Net weight: 85g, 100g in aluminium toothpaste pipe
300 ml plastic cartridge.
Also we can base on your require to produce.
======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Silicone sealant
GLASS MANUFACTURER PRODUCT LIST
======================================
Silicone sealant
Polysulphide sealant
Butyl sealant
Acrylic sealant
Polyurethane sealant
MS Sealant
Others
New Products
Painting
======================================
GLASS MANUFACTURER CONTACT INFO
======================================
Add: Huangjiahe,Shushan Street Xiaoshan District Hangzhou City Zhejiang China
Tel: 86-571-82392772
86-571-82393580 Fax: 86-571-82392772
86-571-82363371
Hot line for service: 86-571-82392772
86-571-82393580 E-mail: [email protected]
P.C: 311203
GLASS MANUFACTURER CONTACT INFO
======================================
Add: Huangjiahe,Shushan Street Xiaoshan District Hangzhou City Zhejiang China
Tel: 86-571-82392772
86-571-82393580 Fax: 86-571-82392772
86-571-82363371
Hot line for service: 86-571-82392772
86-571-82393580 E-mail: [email protected]
P.C: 311203
======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Hangzhou Zhijiang Silicone Chemicals CO., LTD, located in Hangzhou, Zhejiang Province, China, established in 1996, specialized in sealant research, produce and sales, is a hi-tech and joint-stock company. Now we are one of the most important manufacturers and suppliers at home and abroad, offering a wide range of new chemical products for construction, automobile and machinery. Due to the super excellent and steady performance, our products have been named the “CHINA TOP BRAND” and our “JINSHU” trademark has been named “CHINA WELLKNOWN TRADEMARK”. Now our trademark “JINSHU” and “ZHIJIANG” are registered in more than 30 countries, like European Union, USA, India, and Andorra and so on.
GLASS MANUFACTURER COMPANY PROFILE
======================================
Hangzhou Zhijiang Silicone Chemicals CO., LTD, located in Hangzhou, Zhejiang Province, China, established in 1996, specialized in sealant research, produce and sales, is a hi-tech and joint-stock company. Now we are one of the most important manufacturers and suppliers at home and abroad, offering a wide range of new chemical products for construction, automobile and machinery. Due to the super excellent and steady performance, our products have been named the “CHINA TOP BRAND” and our “JINSHU” trademark has been named “CHINA WELLKNOWN TRADEMARK”. Now our trademark “JINSHU” and “ZHIJIANG” are registered in more than 30 countries, like European Union, USA, India, and Andorra and so on.
.Equipment and Technology
Our company owns eight fully automatic sealant production lines， which were imported from Germany and Italy with an annual production capacity over 30 000 tons. Additionally, we have established a top-ranking Laboratory and Provincial-Level Enterprise Technology Center, and also have a highly qualified professional team consisting of professors, middle aged and young specialists, possessing strong product development, innovation and marketing service capability.
.Products and Quality
There’re eight main series of our products, which can be further divided into more than 30 subordinate categories. They have been widely used in construction, decoration, automotive, rubber and electronic industries. “Quality takes priority over everything else”. The quality of raw material, intermediate and finished products will be tested by our quality-control team. Our company has been certified to meet the ISO 9001:2008 Quality Management System, ISO14001:2004 Environmental Management System, GB/T28001:2001 Occupational Health and Safety Management System. Also our IG sealant meets with EN1279-2, 3, 4 CE certification. Excellent equipment and strict management give assurance to the quality of our products.
ZHIJIANG’S products comprise:
.Silicone sealant .Polysulphide sealant
.Butyl sealant .Acrylic sealant
.Polyurethane sealant .Modify polyurethane sealant
.Butyl waterproof tape .Anchor adhesive
.Epoxy Structural Sealant for constructions .Gasket silicone sealant
.Butyl sealant .Acrylic sealant
.Polyurethane sealant .Modify polyurethane sealant
.Butyl waterproof tape .Anchor adhesive
.Epoxy Structural Sealant for constructions .Gasket silicone sealant
.Market and Service
Now we are an important suppliers for curtain-wall companies, glass glazing manufacturers, land agent, decoration companies and automobile manufacturers at home and abroad, such as in Japan, European, Middle East, Southeast Asia , South and North America and so on. Our products have been used in the building at home and abroad, like The Russian Federal Building, Air rail Center Frankfurt, the Administration of the State Bureau of Technical Supervision and in the Jiangsu Building in Shenzhen City, Beijing TV Center, which will be used to directly broadcast the 2008 Olympic Game, the Lasa airport in Tibet and so on. Our products are greatly appreciated by the customers. We will strive for each customer’s demand and provide the best service.
.Our future
Taking a broad view of the world and having the future in mind, we would consistently pursue the Management theory of “Sincerely cooperate, share, and grow up together”. Closely cooperating with all parties concerned in society, we will sincerely supply high-quality products and the perfect service. We can prove our leadership position in the sealant industry every day at home and contribute to the development of the building industry and auto making industry of the whole world
If you are looking for any glass products in China, or need any help of glass(specially laminated glass, smart glass) in China, just send an email to [ [email protected] ] , and you will get the answers of what you need in 24 hours. To learn more, please go to www.HelloGlass.com .