GlassHelps.com

======================================
GLASS MANUFACTURER MAIN PRODUCT   
======================================

Forced Convection Heating Flat Tempering Line
Patent internal recycling convection radiation dual firing system CRS, realizes the convection, the radiating capacity curve synchronization adjustment. Can adapt each kind of glass. Especially LOW–E (E=0.019) glass. The domestic origination through the section technology, the energy conservation is remarkable. On, the leeward grid lead screw control, holds a meeting alone, the localization is accurate

Double Chamber Forced Convection Heating

The double room toughening furnace uses two heating furnace bodies in the heating zone, each heating furnace body hypothesis different temperature and the glass tapping temperature, reduced the glass entered when the stove the temperature difference to create oversized to the armored glass quality influence. Enhanced the glass effect, the rate of finished products, the production efficiency, the output to be possible enormously to enhance 1.5~1.8 times

Pass Through Flat Tempering Line

1.The radiation board heating system, the furnace temperature even glass is smooth. Cuts the transformer installed power. 2. Upside HT convection heating system. 3. The domestic origination through the section technology, the energy conservation is remarkable. On, the leeward grid lead screw control, holds a meeting alone, the localization is accurate

Continuous Flat Tempering Line

1.Imposes the hot leg to use patent internal recycling convection radiation heating system CRS 2. Uses originally creates the multi-spot synchronous motor isolation technique, the movement stably reliable

Lengthwise Bending and Tempering Line

Vertical curved steel unit’s superiority The double-end transmission, avoids the glass running in the wind grid. The automatic accent tune, facilitates quickly. Gear + guide screw organization, formation stable reliable.

Cross Bending and Tempering Line

Horizontal curved toughening furnace’s superiority The leeward grid spline shaft spline nested design adjusts the tune to be automatic, to be accurate. 2. The winning side grid friction gear drag roll structure, the transmission is steady. 3. The winning side grid manual accent tune installment, adjusts the tune to be accurate

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
 Glass Tempering Furnace 

> Forced Convection Heating Flat
> Double Chamber Forced Convection
> Pass Through Flat 
> Continuous Flat 
> Lengthwise Bending 
> Cross Bending 
Float Glass Line

 > Cuting Machine
> Subdivision
> Glass Conveying Roller
> Inspecting Loadine Table
> Annealing Furnace
> Automatic Break
> Marking Machine
> Main Production Panes
> The Feeding Machine

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
Yuntong Glass Mech-Electro Technology Co.,ltd
  Phone: 0335-8500246 / 8500249 / 8501081 / 8501573

  Fax: 0335-5910799 / 8501071

  E-mail: [email protected]

  Address: 59 Qinhuangxi Str. QETDZ Qinhuangdao Hebei 066004 China

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
 Yuntong Glass Mech-Electro Technology Co.,ltd is always aiming to research and manufacture glass production an processing equipment. Benefit of its ability in esign, manufacture, installation and adjustment, Yuntong’s tempering furnaces have developed to more than 100models, containing flat tempering series products, bending tempering series products, flat and bending combined series products. While keeping a good market share in China, Yuntong has installed machines in over 40 countries around the world and certified by ISO9001, ISO14001, OHSAS18001 and the European CE.

As a permanent member of the Chinese Ceramic Society and the first factory that manufactured glass tempering furnace in China, Yuntong initiated the Industrial Standard of Glass Tempering Furnace and possessed more than 20 patents. The original convection heating technology is at the leading edge of the whole glass industry and the forced convection heating flat tempering line has been our main product.

Technology and management are our support,  products of high quality and improving those are our aim,  revitalizing national industry and flourish of Yuntong’s brand are our dream.  Let’s work together.

======================================
GLASS MANUFACTURER MAIN PRODUCT   
======================================
CRB-S™ Cylindrical Radius Bender System for Solar Parabolic Shapes

The Glasstech CRB-S is a highly productive, very accurate and economical system capable of producing the shape conformity and quality demanded by the solar power industry. This tempering/heat strengthening/low-stress glass system produces large (low-iron) glass for parabolic solar reflectors. The innovative, new CRB-S can produce bends up to 1900mm x 1700mm (74.8″ x 67″) and is precise enough to produce glass suitable for laminating.

NEW CRB-S™ Glass Shaping & Processing System Advantages

•Innovation in parabolic trough glass production
•Based on 15+ years of proven core technology
•Glass strengthening and flexibility
◦Tempered – 4–5 times stronger than annealed glass
◦Heat strengthened – 2 times stronger than annealed glass
◦Low stress – Similar to annealed glass
•Bending thickness from 1.6mm–5mm (0.63″–3/16″) or thicker
•No tooling required
•Fully automated and computer-controlled
•Highly accurate part shapes meet industry requirements
•Significant energy savings over conventional methods
Precision, Repeatability, Energy Efficiency and High Volume = Lower Part Cost

See brochure and product sheet for additional details

EPB-S™ External Press Bender System

The Glasstech EPB-S tempering/heat strengthening system was developed to produce very high quality bent parts economically, with an emphasis on creating highly accurate shapes while minimizing tooling costs. It’s ideal for the production of smaller, high volume spherical and parabolic shapes for CSP and CPV. EPB-S features fast cycle times and highly accurate perimeter and surface tolerances. The most productive EPB systems can produce 900 parts per hour.

EPB-S™ Glass Shaping & Processing System Advantages

•Versatile, complex-bend glass processing
•Spherical and parabolic shape capability
•Scalable
•Single and dual stream options
•Can achieve a 3.5-second cycle time, depending on part configuration
•Glass strengthening and flexibility
◦Tempered – 4–5 times stronger than annealed glass
◦Heat strengthened – 2 times stronger than annealed glass
◦Low-stress glass option
•Independently bent parts suitable for lamination
•Precision and energy savings
•Low tooling cost
Precision, Repeatability and High Volume = Lower Part Cost

See brochure and product sheet for additional details

DB 4-S™ Advanced Deep Bend & Tempering System

The Glasstech DB 4-S tempering/annealing system is ideal for producing dish segments and smaller, high volume spherical and parabolic solar collector deep bend shapes for CSP and CPV.

DB 4-S™ Glass Shaping & Processing System Advantages

•Deep bend glass processing
•Specifically designed for complex glass shapes
•Exceptional quality and uniformity of shape
•Based on 20+ years of proven core technology
•Glass strengthening and flexibility
◦Tempered – 4–5 times stronger than annealed glass
◦Heat strengthened – 2 times stronger than annealed glass
◦Low stress – Similar to annealed glass
Precision, Repeatability and High Volume = Lower Part Cost

See brochure and product sheet for additional details

ERH-S™ Electric Radiant Heater Flat Glass Tempering System

The Glasstech ERH-S continuous flat glass tempering system is ideal for processing high transmission (low-iron) cover panel and active (coated superstrate) glass, as well as clear glass for PV panels. Options incorporate Glasstech’s patented Profiled Convection™ system to assist in processing coated/TCO glass at greater efficiencies.

ERH-S™ Continuous Glass Strengthening System Advantages

•High precision production
•Excellent uptime and reliability
•Proven technology
•Ability to process:
◦Low-iron glass
◦Low-iron textured glass
◦TCO-coated glass for photovoltaics
Precision, Repeatability and High Volume = Lower Part Cost

See brochure and product sheet for additional details.

FCH-S™ Forced Convection Heater Flat Glass Tempering System

Glasstech FCH-S technology has become the definitive method for heating glass that does not easily respond to electric radiant heat. The system is ideal for heat-treating active, high light transmission (low-iron) smooth or textured cover panels, rigid back panels and clear glass for PV panels. With full convection heating, FCH-S requires less facility space for productivity equivalent to electric radiant heaters. In addition, FCH-S offers an energy cost-saving solution alternative in locales where natural gas is a more attractive fuel supply.

FCH-S™ Continuous Glass Strengthening System Advantages

•High precision production
•Gas fired cost advantage, depending on location
•Superior heating including coated glass products
•Proven technology
•Ability to process:
◦Low-iron glass
◦Low-iron textured glass
◦TCO-coated glass for photovoltaics
•Meets stringent PV industry flatness standards
•Less facility space required for equivalent productivity
•Robustly built for long life and capability
•Systems running around the world
Precision, Repeatability, Energy Savings and High Volume = Lower Part Cost

Glasstech FCH-S is the definitive system for the high quality, low cost production of coated glass products.

See brochure and product sheet for additional details

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Solar

Automotive

Architectural

Aftermarket

Inspection

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
Glasstech HeadquartersPerrysburg, Ohio
Tel: +1-419-661-9500
Fax: +1-419-661-9616

Glasstech, Inc.
Shanghai Representative
Shanghai, China
Tel: +86-21-5836-7560
Fax: +86-21-5836-8968

Glasstech, Inc.
Indian Liaison
Mumbai, India
Tel/Fax: +91-22-2528-7575

Glasstech, Inc.
New York, New York
Tel: +1-212-489-8040
Fax: +1-212-307-5781

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Glasstech, Inc., is the world’s leading manufacturer of glass bending and tempering technology for the solar, automotive and architectural glass markets.

Innovative ideas and concepts were largely responsible for Glasstech’s early success, after the company’s founding in 1971. Today, that spirit of innovation continues as a new generation of products – from a new generation of technology – is being brought to market by a new generation of management.

Glasstech is based in Perrysburg, Ohio, USA, with facilities in New York City; Shanghai, China; and Mumbai, India.
 

======================================
GLASS MANUFACTURER MAIN PRODUCT 
======================================

Name：Glass Straight-Line MachineModel：JGZM9325

Details:

Model JGZM9325 is applicable to the grinding edge.bottom edge and pointedness of plate glass of different size thickrness.lt provides rough and fine gringing and polishing at once.It can be polishing itself.and the edge that has been polished just looks like theorigenal.While adjusting different processhg thickness, collate the transmitthg system that centroled by eletronic before adjusting,and the fore chamfering grinder can be moved synchronically with the fore beam, with advanced structure high precision,easy operation and high working etflciency.lt is the necessary tool for glass technology

Name：Glass Straight-Line MachineModel：JGZM8325

Details:

Model JGZM8325/JGZM4325 is applicable to the grinding edge.bottom edge and pointedness of plate glass of different size thickrness.lt provides rough and fine gringing and polishing at once.It can be polishing itself.and the edge that has been polished just looks like theorigenal.While adjusting different processhg thickness, collate the transmitthg system that centroled by eletronic before adjusting,and the fore chamfering grinder can be moved synchronically with the fore beam, with advanced structure high precision,easy operation and high working etflciency.lt is the necessary tool for glass technology

Name：Glass Straight-Line MachineModel：JGZM4325

Name：Glass Beveling Edging MachineModel：JGZXM261Details:

 This machine applies to the base and hypotenuse of large quantity of grinding plate,around connecting plate adopts to add thick steel plate and rigid strongs,not changeable shape.bear wear ability is well and delivered smoothly, using life is the 2-3times of the product of same occupation.

Name：Glass Beveling Edging MachineModel：JGZXM261SDetails:

The machine applies to grind and polish fiat edge with arrises;with direct type wheelhead generator.structure is compact, noise is low.fault is few;generator controled,wheelhead may be overall to advance or retreat, figure shows that process glass thickness, may possess the glass of 30x30mm at least, structure is advanced,accuracy is high,operation is convenient.

Name：Glass Round Edging MachineModel：JGYMZ6320Details:

JGYM6320/JGYM4320 is suitable for grinding peripheral edge such as pencil ,OG fiat edge with arrises, and bevel of different shape glass by equipping different kinds of wheels. It used shaping-grinder to be grinded and polished, and can grind high-accuracy glass, It provided with stepless speed variator regulating the speed of processing.

Name：Glass Round Edging MachineModel：JGYM4320

Name：45 ° Glass Straight-Line MachineModel：JGZM9325-45°Details:

This machine is used in the Straight Edge and 45° Multi-Egde Grinding for the different size and thickness flat glass. Coarse grinding and fine grinding, polishing complete in one time. Digit shows the thickness of the Glass, speed can be adjusted by the step-less regulator. Advantage: wide processing craft, Easy ,convenient of the whole processing.

Name：Single-Am Special Edging MachineModel：JGYM1321Details:

It’s a semi-automatic Outer-round shape edging machine for the fiat glass,It can process the bevel edge,round edge fiat edge OG edge and other shape of edgeby using different wheel.lt’s a ideal processing machine for it is easy operation and wide processing range

Name：Glass inner&outer Shape edging MachineModel：JGYM1321Details:

It’s a semi-automatic Outer-round shape edging machine for the fiat glass,It can process the bevel edge,round edge fiat edge OG edge and other shape of edgeby using different wheel.lt’s a ideal processing machine for it is easy operation and wide processing range

Name：Nesting Glass Drilling MachineModel：JGZK0222Details:

JGZK0222 overlay glass drilling machine uses pneumatic clamping device to load glass, sues upper and lower drill bits to drill holes, the lower drill can goes up automatically, the position and speed can be adjusted. With auto feeding function, the worktable can move up and down pneumatically. The machine can be used for continuous mass production and processing.

Name：Automatic Horizontal Drilling MachineModel：JGZK0220ADetails:

JGZK0220A automatic horizontal drilling machine Adopts PLC control and Oil pressure buffer technology ;Fast drilling with high quality;, Movable coordinate location ,High precision of perforation pitch.

Name：Glass Angle Gring MachineModel：JGDJ1350Details:

Suitable for processing batches of latter-sight, round, glass or crystal glass with moulds. Can put two pieces of glass on the machine at one time,the grinding wheel processes one by one.

Name：Glass washer And DrierModel：JGX1600Details:

JGX1600 glass beveling edging machine used for different thickness of glass and lens automatic cleaning and drying, the horizontal transmission, using a strong hot air drying system for drying, temperature can be automatically controlled and can be set free, and the conveying speed can be adjusted.

Name：Glass washer And DrierModel：JGX1200

Name：Fission sand Spraying MachineModel：JZP1000
Details:

It is a professional sand blower with mainframe and dust collector.It is able to operate fine glass arts. glass sand-blasting,anaglyptics etc.As well as on the mould,metal and craft works.

Name：玻璃直线多边机Model：JGZM12-3-25-45Details:
JGZM12-the 3-25-45 degrees glass linear multilateral machine, feeding speed 0.7 5 m/min, the minimum processing size 80 mmx80mm, processing thickness 3 mm-25 mm, power 27.5 kw, appearance x1000x2500mm size 7500, weight 3500 kg

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Glass machinery equipment

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
address：Guangdong foshan city shunde lunjiao industrial area
phone：86 0757 22815969           fax：86 0757 22815969
contact：Mr Song             Mobile phone：18928626496
Zip code：528300
site：www.fsjgsg.com        www.jg-sg.com
         http://songjianming1688.cn.alibaba.com
E-mail:[email protected]
 

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Foshan Shunde District giant steel deep glass machinery factory is located in the scenic Shunde foshan. Strategic location, convenient transportation.Engaged in glass machinery and equipment scientific research, production, sales in one of the professional manufacturers. I plant the main glass production machinery and equipment are: glass milling machine ( including: straight edge machine, linear 45 degree machine, a round straight-edge, straight-line beveling machine, special-shaped machine, drilling machine, chamfering machine, belt machine, sandblasting machine, washing machine, double straight edge machine, double circular machine, and various accessories such as milling machine. )Corporate philosophy:High quality, cost-effective, and strive to become the best supplier of glass machinery, is a giant steel deep glass machinery factory of common objectives. The company constantly committed to new product development at the same time, pay more attention to the product after sale service, the company have been in the country set up their own offices, established a perfect after sale service network, to fully guarantee the customers pre-sale, sale and after sale service, allows customers to buy rest assured that the use of satisfaction.I plant products sell well at home and abroad, much people of all ages.Yesterday you are grateful for the support of our words, today let us work together, create brilliant!

======================================
GLASS MANUFACTURER MAIN PRODUCT    
======================================
Horizontal Tempering Furnace Series

I. Brief introduction of working principle and structure
This machine is composed of Loading Section, Heating Section, Quenching Section, and Unloading Section.

 There are uniformly installed many quartz ceramic rollers in the heating section. The rollers are excellent in linearity, roundness and heating deformation. They can make the glass avoid to be distorted when heated. The control method in the heating section is intelligent module and PLC.

 Inside the heating furnace, there is equipped with force convection device to make the glass have the consistency and stability within the heating prophase period. It can basically solve the question that the glass explodes in the furnace when heated. For protecting the quartz ceramic rollers, we add the SO2 gas protection system.

 The quenching section is composed of high-pressure blower, blades, and drive system. The blades in the quenching section make the cooling-air blow evenly on and below the glass surface. The distance between the blades and glass is adjustable.Glass is laid in the loading section and taken out from unloading section.

 The characteristic is high production efficiency, excellent quality, and low energy consumption.

  II. Technical parameter    

EVA Laminating Machine

    I. Main structure
      Entrance table
      Washing machine
      Gluing section
      The first pre-heating and pre-pressure machine
      The second pre-heating and pre-pressure machine
      Exit table
      Autoclave
II. Specification
      2000*3600mm
      2500*4000mm
      2500*4500mm
Other size can be made according to customer’s requst.
 

Glass Machinery Manufacture

Brief introduction of Glass Machinery Manufacture

This furnace is mainly used for manufacturing Glass Machinery Manufacture for domestic electrical appliances, decoration and large size Glass Machinery Manufacture for buildings or other use.

It is composed of Loading Section, Heating Section, Bent Quenching Section, Flat Quenching Section, Unloading Section, Blowing System and Electrical Control System.

The normal disposal of horizontal Glass Machinery Manufacture is that flat and bent air bars are beside the two end of Heating Section. When it is producing bent glass, glass goes from the Loading Section, through the Flat Quenching section, then heated in the Heating Section, when it is heated to a certain temperature in the heating section, then quickly out and enters into the bent quenching section to finish formation and quenching. When it is producing flat glass, glass goes from the other end of the Heating Section to enter the Heating Section, after goes out of the heating section, enters the Flat Quenching Section to be tempered, then unloaded on the Unloading Section.

The construct specialty of this machine is: have bidirectional moving function, can highly improve glass quality.

You can check more details about Glass Machinery Manufacture on our website

Parameters:

HARD AXIS

Basin Tempering Furnace

I. Usage
This machine is recently specially designed and manufactured for glass basin manufacturing factories. It is used for glass basin��s bending and tempering. This machine applies new technics of one-off formation by heat bending and tempering.

II. Features
1. Low investment;
2. High efficiency and low energy consumption;
3. High rate of qualified product: normally above 95% (required by extractive grinded edge, complete anneal and skillful operation).
All the products are according with the standard of GB/T9963-1998 or tempering standard of JIS R 3206.

Orthogonal Bending Tempering Furnace

The machine is specialized in processing tempering glass of L\U\Z type, such as teapot glass and fish jar glass. The flat glass can be heated, bent and tempered to the destination type  one time. The feature is high quality, high rate of finished products and low self-explode.   

 This machine has high automation degree. There are many specifications for customs to choose, such as single-heating single-quenching mould, double-heating single-quenching mould, single-
heating double-quenching mould, etc.   

     Producing glass thickness: 10-19mm   
    Flat glass max. size: 1000*2500mm   
    Total power:             200kW   
    Production efficiency:  6-12 piece/hour

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Horizontal Tempering Furnace Series 
 Flat/Bent Glass Tempering Furnace Series 
 Glass Washing Machine Series 
 Equipment for Flat Laminating Glass 
 Basin Tempering Furnace 
 Rotating Heat-Bending Furnace 
 Orthogonal Bending Tempering Furnace 
 Hanging Tempering Furnace 
 QX-BTV Bending Tempering Furnace

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
HANGZHOU GLASS TECHNOLOGY CO., LTD

Tel: 0086-21-57235208

0086-21-57235220 (Sales)

E-mail:[email protected]

Address: Linbao Road 355, Tinglin Industry Zone, Tinglin Town, Jinshan District, Shanghai, China

Distributor in the U.S.A: THE JORDON GLASS CORP

Tel: ++305-482-0116

Fax: ++305-482-0119

Address: 6320 NW 99th Ave. Doral, FL 33178

Website: http://www.jordonglass.com

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Nowadays, glass has been indispensable for people`s daily life. It has not only a lot of usage, such as used for home appliances, automobiles, decoration, etc, but also gradually becomes a very important method for people to beautify their living environment. Consequently, the importance about the glass further processed machines is all-time obvious.
Hangzhou Glass Technology (the primitive name is Hangzhu Qunxing Glass Machinery Factory) is located in Hangzhou, which is a modernized city with beautiful landscape and convenient traffic. Our company has beeing devoted to the research, development, manufacture and sale of the glass further processed machines all the time, and has already grown into a professional manufacturer with certain scale and the production capacity of manufacturing glass further processed machines now. Our company has experienced technicians, who grasp the professional advanced technology of this field in Taiwan. Rely on this and many years` manufacture experience, we have already offered the high-quality machines and satisfactory service for vast glass processing producer .
Our products include Horizontal Tempering Furnace Series, Bending Tempering Furnace Series, Basin Tempering Furnace, Orthogonal Tempering Furnace, etc. The feature is superior performance, high production efficiency, low energy consumption, low investment, reliable function, and reasonable price. Our products have been sold not only at home, but also the abroad, such as The U.S.A, India, Singapore, etc, and received high praise from them.
At the same time, we have tried to enter the glass further process field, personally tasted the heartfelt wishes in the field. It has strengthened our understanding to customers demand, and let us much closer to users. It also helps us produce the perfect products with more rational design to meet the customers` requirement in many aspects.
From many years on, `Existing by Quality, Developing by Science` is the direction we striving for and `Pursuing Quality, Cherishing Practicality, Ceaseless Innovation, Keeping Improving` is the aim we working for. On the basis of steady existing products, we researched and developed new products suitable for different customers` different requirements. It is the perpetual service aim that `Let you obtain the largest economic benefit`. We will continually cooperate with domestic and international, old and new customers sincerely, will promote communication, make greater contribution for the glass further processed machines of our country moving towards the world, and compose the new page of the field together