GlassHelps.com

======================================
GLASS MANUFACTURER MAIN PRODUCT                                 
======================================

SZ-SD2225  Glass straight-line double edging machine is suitable for grinding two parallel straight-line edge of flat glass, rough, fine and polishing at one time, its feature of high precision, efficiency and secure .the lathe bed use the double straight-line guide rail and ball-bearings, the drive is smooth and reliable. The product adopts the PLC control, speed control by transducer. Set parameter via the intelligent interface. Finish to work at one time, the operation is easy and convenient.

SZ-SD2215/25/30/40 available in different models (from 1500mm to 4000mm width), each of which is equipped with 22 spindles (11spindles per side with safety corner cutting)

SZ-ZB4 is equipped with 4 spindles, which is well working for edging and 45 degrees arrising on various size and thickness of glass sheets. The Rough grinding, fine grinding and arrising could be finished at one time. The same thickness of sheet glass could be continuously processing, so that allow to have a bulk production for the pre-processing before tempered, insulating, laminating and other further processing.

SZ-W26 glass washer & drier adopt horizontal structure, the flat glass placed on the conveyor roller, passing in-feed section, washing section, drier section, and out-feed section. Glass washing and drying machine is used for cleaning and air-drying of flat glass panes. There are various types available for different glass, float, coating and low-E glass. Washing and drying sections can be elevated or lowered as a whole with PLC. Only in this way will come off satisfactorily.

SZ-XB251 is designed for beveling and side edging of glass sheet with various size and thickness. The rough grinding, fine grinding as long as polishing are able to finished at one time, the processing speed is adjusted by variator which offers a wide range of speed selection; input and output conveyors adopt timing belt which can improve the stability of transmission; PLC and digital display are available for optional

SZ-ZK130 Glass drilling machine is a cold processing machine which is easy to drill holes on sheets of glass and is equipped with upper and lower drilling bit. An automatic cylinder drives the lower-drill bit while the upper bit is operated by manual. Holes of different sizes can be achieved with bits of differentdiameters. this machine works efficiently, it has low glass damage and is easy to operate

SZ-YB1 inter &external shape edging machine applies to grind and polish for shaping peripheral edge of circular ,  ellipse and irregular flat glass ,  and also applies to semi-automatic  grinding for circular and  elliptical glass  .  Using different shaping grinding wheels can obtain the half- round, flat or OG edges of glass.

It is equipped with three automatic sandblasting guns, which controlled by programers, and also one more gun for manually, so that be available for both bulk production and single peice processing.

SZ-DJB9 is able to grind and polish the miter angle on glass, with side edging & polishing and rear seaming, all above process can be worked on same time. The control system applied with Mitsubishi PLC control unit. Input and output conveyor adopt timing belt which can improve the transmission precision. The processed glass surface is very bright and smooth, approaching the original glass surface.

SZ-BG1015 is covenient to operate and specalized in grinding arris of flat glass before tempered, laminated and other further processing

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Double Edging Machine

Straight Edging Machine

Straight Beveling Machine

Miter Edging Machine

Shaped Edger & Beveller

Drilling Machine

Washing Machine

Sandblasting Machines

Sand Belts Grinding Machine
======================================
GLASS MANUFACTURER CONTACT INFO
======================================
Tel:+86 10 89447422
Fax:+86 10 89443531 Mob:+86 13683680261
[email protected] [email protected]
MSN: [email protected]

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Sager Tec. is a professional designer and manufacturer for machinery, which specialized in glass industry. At initially, Sager was dedicating to design and produce glass laminating equipment, as long as providing solution for laminating glass processing. The products have been sold to USA , Europe, Australia , South America etc., where more than dozens of countries in past few years, With a fast growing and developing, Sager was starting up the project for new glass processing machines in 2007, by optimized cooperation and source integration, we are ready and confident to provide you qualified machines basis on 10 million fixed capitals, 35 technicians and 396 employees. Now, the products range is increased, to which including competed PVBLaminating production line, EVA laminating furnace,
and materials, all the type of grinding machines, as long as washing machines and other glass processing equipment. Our business philosophy is “ source integration, technology renovation, ensures quality and service clients” we promise only to what we can achieve. Beijing provide qualified and advanced products for our clients in glass industry is our mission

If you are looking for any glass products in China, or need any help of glass(specially laminated glass, smart glass) in China, just send an email to [ [email protected] ] , and you will get the answers of what you need in 24 hours.

If you are looking for any glass products in China, or need any help of glass(specially laminated glass, smart glass) in China, just send an email to [ [email protected] ] , and you will get the answers of what you need in 24 hours.

======================================
GLASS MANUFACTURER MAIN PRODUCT                                  
======================================

[Product name]:MT Series Bent Glass Laminating Lines
[Simple introduction]:Main purpose: MT-JLW continuous thermal bending furnace is used to produce the front laminated windshield for different automobiles and other thermal 
[The main parameters]:
Main purpose: MT-JLW continuous thermal bending furnace is used to produce the front laminated windshield for different automobiles and other thermal bent glass. 

 [details]:

Note：The above sizes are the normal ones，we can design the machine according to your special requirements.

Main purpose:

MT-JLW continuous thermal bending furnace is used to produce the front laminated windshield for different automobiles and other thermal bent glass.

Main technical features:

● Special electric heating element arrangement and power distribution, professional oven-temperature intelligent control ensure the process requirements of each pre-heating, forming, annealing and cooling zones.

●Heating elements can be controlled separately and some of the heating elements are equipped with individual elevating device, especially suitable for producing curve glass with different shapes.

●Special spire screwy matrix heating method and professional oven-temperature intelligent control ensure the equilibrium and high speed for glass heating.

●Top quality insulating material, special heat-preservation layer arrangement process and reasonable process technology guarantee the lowest energy consumption.

●Powerful control soft-ware ensures high automation, comfortable man-machine interface and easy operation.

horizontal type

vertical type

Purpose:

MT-JWY is a special machine for producing bent laminated glass for automobile windshield, which is divided into vertical and horizontal types for option. Machine structure: This machine is composed of heating section, transmission system, vacuum system and air circulation system. It is driven by chain; The speed is controlled stepless by frequency inverter; Temperature is controlled automatically. There are two ways to support glass for transmission system: point support for horizontal type and pole support for vertical type.

Machine features:

●This machine is driven by chain with speed control inverter and automatic temperature control system, which is suitable for continuous working with large batches.

●High producing speed and productivity, lower energy consumption and high finished product rate are its distinct advantages.

MT-JWH Series Bent Laminated Glass Sheets-combining Machines

Purpose:

MT-JWH is a special machine for producing arc-shape laminated glass, which is composed of powder-cleaningsection, sheets-combining section and PVB fixing section with two glass elevating devices, glass conveyor and vacuum system.

Main technical features:

●PLC automatic control, high efficiency;

●Elevating device adopts mechanical structure, which makes a stable and reliable running;

●Frequency inverter speed control system insures steady running;

●Key elements for automatic control system are products of world famous companies;

●Top quality teeth-shape belt with special glass support block;

●Professional design and manufacture according to customers＇requirements

[Product name]:Force Convection Furnace
[Simple introduction]:According to the convection heating theory, we adopt special designed convection fan and thermal circulation structure…
[The main parameters]:

  

 [details]:

According to the convection heating theory, we adopt special designed convection fan and thermal circulation structure, besides, we apply some other advanced technology, all of which roll into one that speeds the glass heating and improves production efficiency and products quality. The advantage is more distinct when processing Low-E glass. All MT series tempering furnace can adopt this force convection system.

Main technical features:

●Special design of the convection fan makes the high temperature capability more reliable and ensures excellent convection effect.

●The advanced convection circulation structure makes the heating speed higher and the glass heating more homogeneous.

●The special and reasonable arrangement of the heating elements, together with the advanced temperature control module, and PID power adjustment, make the temperature controlling extremely precise, adjustment easier and the oven-temperature more homogeneous.

●The speed of convection fan controlled by inverter is set by computer, which ensures homogeneous heating for upper and lower glass surfaces, and improves the products quality greatly.

●Inside the oven, we adopt high quality material to avoid any bits which may affect the glass quality.

●Double belts for transmission and world famous brand ceramic rollers make the running more synchronous and quality higher.

●The thermal circulation from the convection fan is inside the oven, so the thermal losses can be avoided greatly.

●It has strong processing ability and higher efficiency. Various kinds of glass can be processed such as float glass, patterned glass, Low-E glass, etc. The minimum E-value can be 0.03 for Low-E glass.

[Product name]:MT-GPW Series Flat
[Simple introduction]:MT-GPW series flat/bent glass tempering furnace is mainly used to produce top-grade flat & bent tempered glass for furniture, household appliance…
[The main parameters]:
MT-GPW series flat/bent glass tempering furnace is mainly used to produce top-grade flat & bent tempered glass for furniture, household appliance, shower-room, automobile, ship, architecture, etc. 

 [details]:

Note：The above sizes are the normal ones，we can design the machine according to your special requirements.

Main purpose:

MT-GPW series flat/bent glass tempering furnace is mainly used to produce top-grade flat & bent tempered glass for furniture, household appliance, shower-room, automobile, ship, architecture, etc.
 

Main technical features:

●Full automatic rollers opposite-press forming technology and automatic arc adjustment, ensure exact formation and good roundness without any mould.

●Special spire screwy matrix heating method and professional oven-temperature intelligent control ensure the equilibrium and high speed for glass heating.

●Top quality insulating material, special heat-preservation layer arrangement process and reasonable process technology guarantee the lowest energy consumption.

●Powerful control software ensures high automation, comfortable man-machine interface and easy operation.

●Suitable for float glass , patterned glass, coated glass, Low-E glass, etc.

●Processed products accord with technical standard of GB9963，GB9656，ECER-43， ANSIZ97.1.

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Tempring

Laminating

Mirror Silvering
======================================
GLASS MANUFACTURER CONTACT INFO
======================================
Contact us  Domestic business contacts

The telephone number: +86-379-67071258 
Fax: +86-379-67071258-8000
Mail: [email protected]
Factory address: luoyang los east economic development zone, a glass equipment company

equipment company

The telephone number: +86-379-63329289/9279
Fax: +86-379-63329381
Mail: [email protected]
Office address: luoyang zhongzhou road, tong yuan international garden 3 B a 7 layer

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Mountain company was founded in 1999, is located in the famous historical and cultural city of luoyang, after years of development, has had more than 40000 square meters workshop, more than 400 employees, set to become the product research and development, design, production as one of the glass processing equipment and technology providers.

The company in the beginning will focus on research and manufacture glass processing design of high-tech areas, at present “flat tempered units, bent tempered units, hypoid toughened units; sandwich glass production line; the top to silver glass production line;” Three series of products have been sold to the global, has won the CCC, CE, CNAB three certification issued by the state and practical new-type patent certificate and invention patent certificate, with the first-class product quality and the exquisite technical service is very popular in the domestic and foreign customers. At the same time was established in Shanghai in 2005 of the branch, also make the name, more and more leap into the line of sight of customers and the industry. To meet the global market glass processing industry of high-tech demand, the company in Europe, America, Middle East and other countries and regions have also established the sales center and service center, perfect after-sale service system for the enterprise with problems and difficulties provide guidance to help, meet the customer service for global and promise.

Mountain it is to innovation as a driving force, take the market as the dominant rushed out of a belong to his way, in the future, name, will keep improving, with zero defect for products and high quality service lead the international market.

Interpretation signs

The MOUNTAIN is the meaning of Chinese mountains, the logo subject’s name in English first letter M and T to be varied combination, draw the outline of a towering magnificent mountains, whole is contracted atmosphere has strong visual impact. Identification of the triangle is among red contains the glass tempering production process in the most important heating link, show the name, keep pace with The Times, is uplifting to create industry leading a vision.

Mark with representing high technology, innovation and progress gives priority to color of blue, with a red as tonal, appear very have vitality, name, this is, and always will be the customer benefit in the first place, to create high quality products, this as the goal of enterprise and culture, strive for the excellent quality and superior service for the customer satisfaction.

If you are looking for any glass products in China, or need any help of glass(specially laminated glass, smart glass) in China, just send an email to [ [email protected] ] , and you will get the answers of what you need in 24 hours.

If you are looking for any glass products in China, or need any help of glass(specially laminated glass, smart glass) in China, just send an email to [ [email protected] ] , and you will get the answers of what you need in 24 hours.

======================================
GLASS MANUFACTURER MAIN PRODUCT                                
======================================
Tempered glass：
Tempered Glass and Heat Strengthened Glass is formed by heating glass to the softening point in a horizontal tempering stove and then quickly cooling it with cold air,This technique resists compressive stress on the surface and tensile stress inside which provides bending /shock resistance. Changed the glass original physics performance. It overcomes the glass original operational performance and increases the use scope.
 

Flat tempered glass 

1、Flat tempered glass：
Thickness：3-25mm
3mm thin tempered glass : the Max specification is 1200x2400mm, professional quantified 20 containers per month
Total exports of tempered glass per month is about 60 containers

Bending tempered glass

2、Bending tempered glass：
Thickness：4-25mm
size：Max

Ceramic tempered glass

Ceramic tempered glass：

Ceramic tempered glass is used inorganic ceramic glaze (printing ink), printed to glass surface then drying and tempering. So the ceramic obtain permanent agglutination in the glass surface. It will be one kind of wear resistance acid and alkali the decorative material. Our company has automatic production line for the ceramic and silk India, it could eliminate quality questions such as the non-uniform thickness and Pinhole by the reason of equipment or the artificial process.We can provide the high quality product promptly to customer, the annual output 200,000 square meters.
Product characteristic:
1, Produce many kinds of designs satisfy customer’s request , extremely good for decoration, the color is stable and non-fading;

2, High security, it has characteristic of tempered glass;

3, Adumbral obviously

Applicable scope: Widespread used in construction decoration; also be used in the family glass and the electronic glass frequently.
Thickness: 3mm-19mm

Laminated glass

 Laminated glass：

Specification: MAX 2440mm×3660mm
Thickness:
Thickness of laminated glass:4-35mm
Thickness of PVB film: 0.38mm, 0.76mm, 1.14mm, 1.52mm, and 3.8mm
Colors of PVB film: transparent, blue, green, grey, milky white ,bronze , French grey and different colours .
Monthly productivity:30,000 square meters or 30X20ft container
Quality Standard: conform to GB15763.3-2009 State Standard of Laminated Glass and AS/NZS 2208-1996 Standard

  

Insulating glass

Insulating glass：

Production Process:Insulating glass is composed of two sheets of float glass.Between the two sheets of glass is an aluminium spacer filled with desiccant.The alumimun spacer and sheets of glass are adhered and sealed by butyland then polysultide or silicon. The air heat conductivity is extremely low, the dry air is sealed between two glass, this synthesis spatial glass can directly block the thermal conduction effectively the outflow, thus achieve energy conservation, sound-insulation, ultraviolet ray prevention, and so on.

◆Specification：
Maximum size：3500x2500mm
Minimum size：300mmx200mm
Yearly productivity：100,000 square meters
Insulating glass thickness range:10-60mm
Float glass thickness range:3-12mm
Normal aluminum frame:6A,9A,12A,14A,16A

◆Application：
Application in all room in constant temperature, constant humidity, lonesome and quiet comfortable commercial and civil construction.

Low-E glass

Low-E glass：

PLANIBEL G is a pyrolytic, low emissivity glass.The Low-E coating is applied on a sheet of clear float glass by a pyrolytic process called CVD(Chemical Vapour Deposition)process.
In winter,the aim of the coating is to reflect the heat back to the building to prevent heat loss and keep the climate indoors at an even temperature.
In summer,the coating will reduce the amount of re-radiated heat entering the house thereby keeping indoor cooler.Total heat gain is reduced.

Its ease of use:
No need for edge deletion
Very hard coating
Very long shelf life
Can be heat strengthened or tempered
Can be laminated
Its aesthe tics and performance:
Neutral appearance
Excellent light transmission
Low light reflection
Low emissivity up to U=1.7(with air gap)

Solar energy fabric surface glass

Solar energy fabric surface glass：

Solar energy fabric surface glass is a kind of low-iron ultra clear tempered glass, it reflectivity much smaller than clear float glass. It is suitable high quality monocrystalline silicon and polycrystalline silicon solar energy battery lighting-electricity transfer efficiency. The diaphanous-rate could be 91.5%, the reflectivity less than 4% of this glass.

Specification：
Max. size: 1200mm*2400mm
Min. size: 150mm*200mm
Thickness: 3.0mm, 3.2mm

Self-cleaning solar energy glass：
Self-cleaning solar energy glass is a kind of increase transmission and reduces reverberation, enhance optics transmission, so it enhance solar energy solar heat collect.

Fireproofing glass

High intensity monolithic cesium potassium fireproofing glass DFB
High intensity monolithic cesium potassium fireproofing glass is a kind of special glass which can keep integrality and insulation in the fire resistance test conditions.

Fireproofing capability
The high intensity monolithic cesium potassium fireproofing glass provides with eximious fireproofing capability. It can retain integrity in 90-180 minutes at the impingement of blaze above 1000℃, so it can arrest the blaze and fog from spreading, that should propitious to evacuate the scene and relief work in time.

The appearance of light, thin, and high intensity monolithic cesium potassium fireproofing is figure out the Achilles heel of normal glass that it has poor fireproofing, and improve the safety factor of glass curtain.

High strength cesium potassium fireproofing glass

Besides fireproof ability, the also has better intensity at the same thickness, its strength is 6-12 times than float glass, and 1.5-3 times than tempered glass.

Heat insulation compound grouting fireproofing glass has stronger heat insulation, heat radiation insulation. When fire, it could prevent the wood can carpet of back-light area from lighting. So it avoids of fire spreading.

Patterned Glass

Patterned Glass：
Patterned glass is made by pressing and rolling. Transmission but non-transparent is its biggest feature. Most of it is used in decorative sphere like washing room. Rich in patterns, good quality and fair price are its features. It is one of the key products of the company.
Color：
White, blue, golden, tawny, green………
Thickness
2.2mm—10mm
Pattern：
Big lamp wick pattern, ox bone-script, ter wave, jigsaw puzzle, crystal, diamond, caval wine, raining flower, flower, granite, maple leaf, raining flower, silver bead, small lamp wick, American rainbow, frost flower, granite, maple leaf, raining flower pearl, woven design, cloud, golden dragon, pear, morning star lily, Kilin.
Max specification：
2438x2134mm (84″× 96″)
Common Specification：
1500x2000mm (59″×79″)
1219x2134mm (48″×84″)
1372x2134mm (54″×84″)
1524x2134mm (60″×84″)
1676x2134mm (66″×84″)
1829x2134mm (72″×84″)
1829x2438mm (72″×96″)
2134x2438mm (84″×96″)

Silver mirror

Silver mirror
Advanced float glass silver mirror：
Thickness: 2mm-8mm
Max. Size: 2440mm×3300mm
Technology standard: DD-M-004110 quality standard and INV standard
Glass, mirror-processing products：
a.Cut
Thickness:2mm-8mm
Max. Size:2440mm×3300mm

b.Straight edging grinder
Thickness:3mm-12mm
Max. Size:1500mm×2000mm
Min. Size:150mm×150mm

c.Special edging mirror
Thickness:3mm-12mm
Max. Size:1500mm×2000mm
Min. Size:150mm×150mm

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Edging Standard

Tempered glass

Laminated glass

Insulating glass

Low-E glass

Solar energy fabric

surface glass and

Self-cleaning solar

energy glass

Fireproofing glass

Float glass

Patterned glass

Reflective glass

Silver mirror

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
ADD： Taishan Qingchun Co-pioneering Dvelopment Zone,Taian City,Shandong Province,China
Z I P： 271000
WEB： www.sdhyglass.com 
Customer Service Department：
TEL： 86-538-8560506
FAX： 86-538-8560506
EMAIL： [email protected]
Domestic Market Department：
TEL： 86-538-8560306
FAX： 86-538-8569728
EMAIL： [email protected]
International Market Department：
TEL： 86-538-8569108
FAX： 86-538-8569619
EMAIL： [email protected]
(Oversea) Zibo Pan Europe International Trading Co., Ltd
TEL: 86 533 2772 576
FAX:  86 533 2772 579
EMAIL: [email protected] 

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Shandong Taishan Huayue Glass Co., Ltd. is a glass processing enterprise specialized in tempered glass, laminated glass in building, tempered glass in building, bending tempered glass, tempered glass in curtain wall of building, hollow glass, thermal bending glass, bulletproof glass, fire-rated glass, Solar energy fabric surface glass, ultra-white (low iron) float glass and other high-class glass.

Established in 1996, Shandong Taishan Huayue Glass Co., Ltd. is located in taishan qingchun co-pioneering development zone, Taian City, Shandong Province. STHG has been working hard and now it has been a large-scale glass business company.We have imported 3mm continuous-type line for tempered glass (Currently we have 4 lines for tempered glass that is both used in flatting and bending). STHG is equipped with import homemade of advanced tempering furnace, insulating glass and laminated glass production line, bending glass production line, straight & special shaping edging grinders, acid etched machine and other glass-processing machines.

The company follows the tenet of excellence through people, strengthen internal management, and strict quality control. Upholding the management philosophy of best quality, competitive price, and satisfied service. All our glass products passed the 3C certification, and Australia certification. The quality management system passed the certification of ISO9001: 2000 by world famous organization SGS.

Besides sales to all through China, STHG also sell all kinds of glass to U.S.A., European, Australia, Africa, Middle East, Southeast Asia, South Korea and Taiwan etc. “Zibo Pan Europe International Trading Co., Ltd is our export trade company”

Our Goal: Achieve total customer satisfaction in quality, delivery, service and value.

In order to provide a more perfect service to the customers, by the original glass processing superiority, we founded Shandong Taishan Huayue Glass Installation Company. Until now, the company has completed nearly thousand of curtain wall projects. On the base of enriched engineering design construction experience and consummation, Huayue Glass Installation Company finished lots of modern makings artistic space that constructed by glass and metal.

Huayue Glass Co., Ltd. Hopes to serve for customers by advanced equipments, exquisite production technology and thorough careful service

If you are looking for any glass products in China, or need any help of glass(specially laminated glass, smart glass) in China, just send an email to [ [email protected] ] , and you will get the answers of what you need in 24 hours.

If you are looking for any glass products in China, or need any help of glass(specially laminated glass, smart glass) in China, just send an email to [ [email protected] ] , and you will get the answers of what you need in 24 hours.

======================================
GLASS MANUFACTURER MAIN PRODUCT                                   
======================================

Model: FXM371

Model: FXM371P

Model: FXM471

Model: FD21P

Suitable to grind and polish peripheral edge and bevel of various shape glass. Moving up/down of the abrasive is controlled by PLC for the FD21P model.

Model: FZM14

Model: FZM9325A

Model：YM7    

Joint-links adopts chainless ball bearing construction. LED displays the glass thickness, working speed and finished meters. It has pnuumatic driving polishing system controlled by PLC. Suitable for straight-line pencil/OG edging on various flat galss.
 

Model: FYM7

Model: L style glass straight-line double edging line

This product is consisted of one FSM20/3 straight line double edger with twenty wheels,one FXT4030 transfer table and one FSM20/4 straight line double edger with twenty wheels,It is the best matched eqripment of large batch of furnityre and building glass edge production.

Model: FZ100B

FZ100B Horixontal automatic drilling machine is a new product of our company.The upper and lower drill bits with infrared ray positioning function which is controlled by the PLCand encoder and can automatically falling and rising.Pneumatic working table with prepositioning function is used to support big size glass sheet.Model A upper drill is manually.

Model: FHT3727A+FSP3727

Model: FHT3727B

Model: FLX1600

This is a vertical washing machine used for washing and drying glass from 3~12mm in thickness.
Using 3 pairs of brushes to clean the glass.The air knives supply strong wind to drying the
glass.

Model: FWZ8 Automatic out-rearview mirror peripheral edging machine

Model: FDY2600

Description

Our Mirror Conveyors adopts world leading technology and most up-to-date chmical methods to coat the glass with silver,copper and two coats of protective paint.Provision is also taken into account for copper free mirros.
After loading,the glass is conveyed through following sections:Washing-Polishing-Cleaning Section,Tin Applicationsilvering section,coppering section,drying and pre-heating section,first curtain coate,first curing oven,second curtain coater,second curing over,cooling section,chemical cleaning section,washing and drying section.
The whole process is fully controlled by CNC and produced mirrors satisfying world standards including EN1036.

1、Lengh of the line not including automatic loading and unloading section.
2、Production output(square meters per 8 hours-shift)

Model: FJ Flat laminating line

①、Loading                                                       
②、Washing&Drying                                                
③、Assembline&Air conditioning                                  
④、PVB film positioning&Inspection stationPVB                    
⑤、PVB film storage&Air conditioning room
⑥、PVB film storage&Air conditioning room
⑦、Main heating&Main pressing zones
⑧、Autoclave
⑨、Unloading

(A1) Optional 3200 – 4500mm (A2）Optional 4000 – 6000mm （B2)Optional 8-16
Serious FJ is the latest design in Chine Swrious FJE is European
 

Model: NFT1530 NFT New radiation tempering line series

Independantly and automatically height adjustment of top and bottom nozzles
Nozzle caps especially designed for highest efficiency e.g. 2,85mm glass need 11,1 kPa nozzle pressure
4mm glass need 5,1 kPa nozzle pressure
Very even pressure distribution
(Vmax – Vavg) I Vavg< I
Product Quanlity
Super flat–General flatness:<1.5‰, Local flatness:<1‰
Without stains–>150 for glass with thickness of below Zgmm,and there are no visible stains
Minimum glass deformation: Adopting precision rollers in the quench section. In order to solve the problem of glass
deformation and keep the original optical property.
Optimum glass flatness: The nozzles height can be controlled separately by computer. 15°the flatness of product is very easy to adjustment.

Parameters of NFT Series New Radiation Tempering Line

Note:The above sices are the normal ones,we can design tempering line according to your special requirements

High quality requires special
technologies,e.g.
Conveyor control without back lash or stops
Chain drive with special sprockets
Servo controlled drive for furn ace and quench
 

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================
Bevelling machine(12)

Single-Arm shape machine(4)

Straight-line edging machine(13)

Straight-Line Pencil-Flat-OG…(2)

 Straight-line double edging …(5)

Drilling machine(3) Glass cutting machine(3)

 Washing machine(6)

Prismatic mirror production …(3)

Mirror silvering line(1)

 Flat laminating line(2)

Tempering line(8)

Domestic and foreign custome…(39)

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
Add: Fushan Industrial Park, Anle Industrial Development Area, Dongfeng Town, Zhongshan, Guangdong Province.

  Zip: 528425
 Tel: +86-760-22610338 22600131
 Fax: +86-760-22610328
 E-mail: [email protected]
 Website: www.fushan.cn
 

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Founded in 1998 and covering an area of 56 668sqm, Fushan Glass Machinery Co., Ltd is a manufacturer of world-advanced glass deep processing equipment, with independent capability of design and R & D. In 2000, we established a subsidiary —- Jingshan Glass Technology Company Limited, specializing in design, manufacturing and service of tempering apparatus.
　　　　
We have rich manufacturing experiences and own state-of-the-art processing equipment. Moreover, we have established long-term cooperation with a number of universities and research institutes in development of advanced technologies in order to upgrade continuously our products. At present, we mainly have the following products of dozens of models: horizontal roll flat/bend glass tempering production line, computer-engraving machine, heterotypic cutting line, wave-beveling machine, slivered mirror production line, rearview mirror production line, interlining line, various types of edge grinders, piercing machine, and cleaning dryer etc. Of these, several technological achievements have been patented by national and international authorities, filling a domestic market gap. Furthermore, some other research achievements have been rewarded technology advanced awards.

Fushan Glass Machinery was the first enterprise issued the ISO9001 and ANSI-RAB certificates among other circle companies. We strictly follow the principle of “Customer first”, and by providing quality products and comprehensive technical service, we win customer’s trust and support. Our products receive good buy in overseas market.

“Strive for excellence and reach out to the global market” is our aim and driving force. We will always take quality management as our theme. On the basis of “fine product strategy”, we continue to cooperate with friends home and abroad to make big in glass deep procession machinery manufacturing industry.

If you are looking for any glass products in China, or need any help of glass(specially laminated glass, smart glass) in China, just send an email to [ [email protected] ] , and you will get the answers of what you need in 24 hours.