GLASS MANUFACTURER MAIN PRODUCT
======================================
Glass Vacuum Heating & Laminating Machine
I. Brief introduction
Glass vacuum heating & laminating machine is developed according to vacuum bag principle, at vacuum condition laminates two pieces of glass into one whole art glass through heating laminated materials and glass for peptizing under vacuum conditions. This machine can laminate ordinary glass with silk, cotton, yoshino paper, drawing, ultraviolet single-way clairvoyance, dimming films or special films to make various art glass and decorative glass. It can also be used to laminate glass with pc sheets, solar energy battery sheet, soft sheet and sheet materials. The machine is equipped without any autoclave and hot press. It is simple and reliable in structure, low power consumption, good in quality, which is widely used in glass processing to meet different requirements.
II. Technical parameters:
1.Model one: (8 layers)
Machine dimension: 4800x2200x2500mm
Glass size: 1700x3200mm
Working position levels: 8
Productivity: 90m2/8h（bag method ）
Power consumption:( 5+5），1.2KW
Max. Temperature: 150℃
Heating power: 72kw
Total installation power: 75kw.
Machine dimension: 4800x2200x1900mm
Glass size: 1700x3200mm
Working position levels: 5
Productivity: 90m2/8h（bag method ）
Power consumption:( 5+5），1.2KW
Max. Temperature: 150℃
Total installation power: 42Kw.
Suitable for flexible production of flat laminated glass with high capacity
Autoclave
Autoclave products range covers all architectural sizes. We also deliver complete autoclave processes to meet the requirements of very dissimilar climate conditions, taking into account, at the same time, the client’s own loading requirements etc.
Suitable for final pressing of double or multilayer architectural glass. Available with all accessories such as air receiver, compressor, dryer, water cooling unit, filters, wagons and wagon transfer systems.
Mosaic Tunnel Furnace.
3.All these four segments keep constant temperature by the computer build in.
4.The transmitting component adopts high-power motor with steeples speed change transducer Guaranteeing high efficient production that exceeds 10 pieces per hour.
5.The mesh belt is made up of refractory material which is able to endure 1000℃. For the mesh belt, Two diameter is optional listed as￠2.5mm and ￠3mm.
6.Total Power: 120KW but only 60% power actually needed for the daily production.
Mosaic Cutting Table:
3.Easy to operate, within half an hour, the worker can operate the machine masterly.
4.Cutting efficiency: Max. cutting size: 530mm × 530mm
It can cut 2 pieces of glass per minutes.
The minimum cutting size is 5mm×5mm
EG-500 Breaking machine
Main function: 1. Thickness: 2-10mm
2. Breaking glass dimension: ≥10mm
3. Power: 0.37KW
4. Speed: 60㎡/hour
EG-100 Breaking machine
Specification: 1. Thickness: 2-6mm
2. Breaking glass dimension: ≥10mm
3.Speed: 10㎡/hour
Glass Boiler-lid Tempering line is a specialized line in producing tempered for glass boiler-lid. This line consists of loading section, heating section, intensifying section and unloading section. It is a continuous production line with high efficiency. Controlling system adopts intelligent module & programmable controller PLC to guarantee accurate and reliable control. There are different machine model according to different products processing requirements. All the machines can be customer-tailored.
1. Glass squareness cutter
2. Glass circular cutter
3. Glass grinder
4. Glass stiletto machine
5. Glass washing machine
6. Stainless steel net cutter
7. Circle molding machine
8. Rim Edge-Pressing Machine
EGBT-II Series Horizontal Roller Hearth Flat/Bent Glass Tempering Furnace are mainly used to produce flat/bent tempered glass
Broad applicability:
for architectural applications. Decoration, automotive window screen and domestic appliances, as well ass for furniture.
Low-E glass, coated glass, patterned glass, tinted glasses and all other glasses
Minimum size: 500mm×350mm. smallest curvature radius is 850mm.
Optional Multi-function:
Can produce flat, cylindrical, U-shape, “Z” shape and other complex bending tempered glass.
Easy operation:
Automatic curve forming, whole-procedure, auto-control, self-diagnosis and user-friendly interface
Perfect processing technique:
Flexible spindle forming technology is used, employing with moulds, to get accurate, smooth curves with no flex points.
Low installed power capacity:
The heating & cooling systems are designed to avoid high peak power consumption and to reduce the total power installed
26 grinding spindles series double edging machine is suitable for grinding two straight-line edge of furniture glass, architecture glass with high quality requirement of polishing, rapid speed. The machine adopts high precision transmission structure with two linear guiding bars and two ball bearing guide screw. It is equipped with PLC system on the electric control part. It fixed superior man-machine interface touch screen operation system.
Main Specifications：
Thickness of the processing glass：3mm-25mm
Grinding Speed：0.5m/min-6.5m/min
Parallel tolerance of processing glass：±0.2mm/m
Diagonal tolerance of processing glass：±0.5mm/m
Chamfer tolerance：≤0.2mm/m
Compress air pressure：4kg/cm2×8kg/ cm2
Width size of inverted angle：1-3mm
Power：60kw
Max grinding quantity of bottom edge：5mm
Frequency: 50-60Hz
Model
Parameter introduction:
The main components of extra-high boosting mechanism of EG300 series products adopt imported metal material with high intensity. Their main seal mechanism has the function of automatic compensating from outside, which can make the service life of seal components 3 to 4 times of ordinary one during working. Integrated one-way value is adopted in inlet and outlet, which decreases the number of seal nozzles and then prolongs service life of pump seat. Because optimized design is adopted in the whole machine, pure mechanical boosting make installation and maintenance convenient and easy. PLC control.
Parameter: Max. glass size:2000×4000mm, Min. glass size:1200×1000mm, Power: 18.5kw.
26 grinding spindles series double edging machine is suitable for grinding two straight-line edge of furniture glass, architecture glass with high quality requirement of polishing, rapid speed. The machine adopts high precision transmission structure with two linear guiding bars and two ball bearing guide screw. It is equipped with PLC system on the electric control part. It fixed superior man-machine interface touch screen operation system.
Main Specifications：
Thickness of the processing glass：3mm-25mm
Grinding Speed：0.5m/min-6.5m/min
Parallel tolerance of processing glass：±0.2mm/m
Diagonal tolerance of processing glass：±0.5mm/m
Chamfer tolerance：≤0.2mm/m
Compress air pressure：4kg/cm2×8kg/ cm2
Width size of inverted angle：1-3mm
Power：60kw
Max grinding quantity of bottom edge：5mm
Frequency: 50-60Hz
Model
The machine can cut round glass automatically. We adopt two servo motors and intelligent control. Pneumatic
Capability:
1.Cutting Speed: 0-80pcs/min
2.Accuracy: ≤±0.10mm
3.Glass Thickness:1-19mm
4.The Min Cutting Size:10mm
5.The Max Cutting size:350×550mm
Working Range:
Clock Cover, Hollowware Cover, Mirror, etc.
To adjust Shaped cutting tip against glass thickness:
The production line is consisted of glass loading machine, semi-auto glass cutting machine and glass breaking machine with high efficiency and high accuracy. The production line can be operated easily and safely
Capability:
Vacuum Pump, Stepping Motor, PLC, LCD and other accessories
Loading Time: 55-65 second (can be adjusted)
Glass Thickness: 3-19mm
Cutting Glass Size: 300-6000mm
Working Range:
Appliance Glass, Furniture Glass, Construction Glass, Insulated Glass, etc.
GLASS MANUFACTURER PRODUCT LIST
======================================
Glass Laminating Line
GLASS MANUFACTURER CONTACT INFO
======================================
Address: No.4939, Hangtang Road, Fengcheng town, Fengxian
District,Shanghai City,P.R. China
Tel: +86-21-57170226 +86-21-50392561
Fax: +86-21-57170216
Web: www.easternglass.com.cn
Email:[email protected]
GLASS MANUFACTURER COMPANY PROFILE
======================================
Shanghai Eastern Glass Technology Co., Ltd is a professional manufacturer of glass processing machinery in China, we mainly produce:* Laminating Line, Mosaic glass producing Line, Tempering Furnace, Cutting table & breaking table, Glass Edging Machinery. High technology precision, wide application, stable function and simple operation are the characteristics of the products.
With the business mind “higher technology, higher quality and good service “, Our products are ensured qualified, safe, humane to customers and competitive in price with good operation of internal ISO system, strict CE control to design, purchase and production. High quality products and perfect post-sale services help the promotion in domestic and overseas market.
We do our best to offer our customers the high quality products and best continuous service .Our sincere and perfect sales team can supply with the operators training, installation, commissioning running and after service during sales period.
Shanghai Eastern Glass Technology Co., Ltd will offer you best quality products, timely shipments and most competitive prices all the time
