GLASS MANUFACTURER MAIN PRODUCT
======================================
Technical Specification:
It adopts Panasonic servomotor and cycloid pinwheel decelerator, the transmission speed is very stable and of high precision, which guarantee the good wave shape.
Control system use Mitsubishi PLC control unit.
The main working parameters are set and displayed through an operator interface.
Spindles are driven by high precision ABB motors.
This machine offers 6 basic waveforms of different wavelength, which can meet the different requirements of the customers.
Type of Wave: 6 kinds (30,36,45,60,90,180)
Speed: 0.3-3m/min
Bevel angle : 0°-15°
Max. bevel width: 25mm
Min. glass size: 150mmX150mm
Glass thickness: 4mm-12mm
Total power: 18KW AC 380V±10%/50Hz±2%
Overall Dimension: 6.5mX1.1mX2.2m
Total weight; 3200Kg
This machine adopt PLC control and operator interface. The Screen shows every detailed parameters of glass. The two conveyor belts are driven by two high precision servo motors. The synchronism of transmitting is very high. The torsion of output keeps the constant. The mobile grinding section moves along linear twin ball bearing guide. The transmission is implemented through twin ball bearing lead screws, which is driven by motor with break.
The raise/drop of upper tracking system and upper arris motors are driven by motors. It can be set automatically according to different glass thickness input.
The polishing wheel is operated by air, which can move forwad/back according to glass position.
This machine use high precision low vibration ABB motor.
This machine adopt timing belts transmission.
The machine equipped a auto lubrication pump, which lubricate the lead screw..
Working speed adjustment through Frequency inverter.
The machine is suitable for grinding and polishing inner & outor edge of shape glass. By changing grinding wheel of different shape, flat edge with arris, pencil edge, bevel edge and OG edge can be processed. The height of spindle can be adjusted easily. The pneumatic cylinder makes it possible that round and simple shape glass can be processed automatically.
This machine has another feature that the grinding spindle can rotate up to 90 degree at vertical plane. It is especially convenient to process the peripheral edge of the bending glass such as washing basin.
Max. bevel width: 40mm
Bevel angle: 0°- 45°
Glass thickness: 3mm-30mm
Glass rotation diameter: 400-1400mm
Min. inner circle diameter: Ø40mm
Rotation speed of glass: 0.5-4.5 r/min
Total power: 2.2KW
Overall Dimension: 1.5mX1.5mX1.6m
Weight: 500Kg
This machine adopt time relay controller and oil buff technology. The centering of drill hole can be positioned by means of mechanical method or laser. Pneumatic clamper grip glass with adjustable pressure. The machine has two working status: manual & automatic. In manual mode, the machine only work one cycle. In automatic mode, the machine works continuously. The machine is featured by its high working efficiency, low glass damage and easy operation.
Glass thickness: 3-30mm
Total Power: 2.2Kw
Drill speed 850r/min, 1400 r/min, 2300 r/min
Max. distance of drill hole center to frame 1000mm
Weight: 850kg
Overall dimension: 1.7mx1mx1.6m
This machine is able to grind / polish bottom edge and different miter edge with 10-50 degree variable angle, with front and back seaming .
Control system use Mitsubishi PLC control unit, Operator’s interface display the angle, miter width and other relevant parameters, all parameters can be changed throught touch panel
Amperometers allow to check the wheel absorption and their functioning.
Spindles are driven by high precision ABB motors.
Conveyors: the machine adopt chainless rolling transmitting system, which consists of three bearings rolling along high precision tempered steel guides, the movement of glass is very stable.
The processed glass surface is very bright and smooth, approaching to the original glass surface. This machine is also featured by wide processing range and easy operation.
Miter Angle: 10°-50°
Grinding Depth: 3mm
Max. arris width: 2.5mm
Min.glass Size : 30*30mm*8mm
Glass thickness: 3mm-25mm
Total power: 24.6KW
Overall Dimension: 8.0m*1.2m*2.7m
Total Weight: 5800Kg
This machine has 6 motors which can process glass bottom edge and front arris(0-45 degree), with 2 motors for front seaming and 2 motor for rear seaming.
This machine use BEARING CONVEYOR SYSTEM. It is suitable for small glass (40mmx400mm) and heavy glass(4mx4m) processing.
The machine has a glass thickness protection mechanism. When wrong thickness glass is put in the machine. The machine will stop automatically. This protects the bearings from crushing.
The machine adopt PLC control and operator interface.
The front conveyor movement is motorized. It can be adjusted through electrical button on working panel. The thickness is displayed on the screen. There is also a mechanical readout to show glass thickness.
The working speed can be adjusted via the stepless regulator.
The wheels tank for the variable angle 6 wheels use rotating system.
The processed glass surface is very bright and smooth, approaching to the original glass surface. This machine is also featured by wide processing range and easy operation.
Variable Angle: 0°-45°
Grinding Depth: 3mm
Max. arris width: 2.5mm
Min.glass Size : 30*30mm*8mm
Glass thickness: 3mm-25mm
Total power: 20KW
Overall Dimension: 9.0m*1.0m*2.5m
Total Weight: 5000Kg
The machine produce round edge, OG edge, and other profile edge on flat glass.
Front rail can be manually moved in parallel to adapt to different glass thickness.
Working speed is adjustable through speed regulator.
Amperometers allow to check wheel absorption and therefore it’s correct functioning.
When grinding the round edge, the two front seaming wheels can remove arris of glass, which reduce the work of rear peripheral wheels, prolong the peripheral wheel’s life time and increase grinding speed.
Glass thickness: 3mm-19mm
Grinding Speeding: 0.8m-4m/min
Min.glass width: 80mm
Glass thickness: 3mm-19mm
Grinding Speeding: 0.8m-4m/min
Total Weight: 2500Kg
Total power: 15KW
Base Dimension: 6.6m*1m*2.5m
This machine is designed for grinding/polishing bevel edge, with bottom edge grinding.
This machine adopt PLC control and operator interface (touch panel). The motors can be moved as a group. The parameters can be changed though operator interface. The machine can adjust itself according to the parameter input.
Conveyors use chain transmitting system which consist of anti-friction rubber griping pads with reinforced sheet steel bone. This structure guarantee glass is stably moved. The working precision is high.
Synchronous tooth belt are used in loading and unloading arms to carry glass, which has a stable transportation.
Front rail is driven by motors and move in parallel to adapt to different glass thickness.
Working speed is adjustable by stepless regulator, which offer a wide range of speed selection.
Spindles are driven by high precision ABB motors.
This machine is easy to operate and have a good function.
Speed: 0.75m-3.9m/min
Max. bevel width: 50mm
Bevel angle: 0°-25°
Min. glass size: 100mmX100mm
Glass thickness: 3mm-19mm
Total power: 22.5KW
Total dimension: 7.6mX1.2mX2.6m
Weight: 5000Kg
This machine is designed for grinding/polishing bevel edge, with bottom edge grinding.
Conveyors use short joint & big roller chain transmitting system to transmit glass, the transmission is very smooth..
Synchronous tooth belt are used in loading and unloading arms to carry glass, which has a stable transportation.
Front rail is driven by motors and move in parallel to adapt to different glass thickness.
Working speed is adjustable by stepless regulator, which offer a wide range of speed selection.
Working speed, bevel angel and glass thickness appear on digital display.
Grinding spindles are directly connected with high precision ABB motor.
This machine is featured by high efficiency and precision, stable quality, easy operation and low wear.
Speed: 0.75m-3.9m/min
Max. bevel width: 50mm
Bevel angle: 0°-25°
Min. glass size: 100mmX100mm
Glass thickness: 3mm-19mm
Total power: 22.5KW
Total dimension: 7.6mX1.2mX2.6m
Weight: 5000Kg
The machine performs bottom edge grinding/ polishing on flat glass. This machine can process small glass of 25mmx25mm. The finish of glass is very shining.
Conveyor adopt chainless rolling transmitting system, which consists of three bearings rolling along high precision tempered steel guides, the movement of glass is very stable.
Spindles are driven by high precision motors.
Basement and frame are made of cast iron to ensure stability and solidity
Working speed is adjustable through speed regulator.
Working speed and glass thickness appear on digital display.
working Speed: 0.5m-4m/min
Grinding depth: 3mm
Max. arris width: 2.5mm
Glass thickness: 3mm-25mm
Min. glass Size: 25mmX25mmX8mm
Total Power: 21 kw
Overall Dimension: 7.5mx1.5mx2.3m
Total Weight: 4000kg
This machine is designed for grinding/polishing glass bevel, fine grinding bottom edge of flat glass. The front and back conveyor consist of anti-friction rubber pads which use reinforced sheet steel with strong rigidity as the base, this structure guarantee glass is stably moved and have a very high grinding precision. Transmitting speed can be adjusted by stepless regulator, which offer a wide range of speed selection. This machine is easy to operate and have a good function.
Speed: 0.3m-3m/min
Max. bevel width: 30mm
Min. glass size: 100mmX100mm
Glass thickness: 4mm-15mm
Bevel angle: 0°-15°
Total power: 21 KW (380V 50Hz)
Total dimension: 6.4mX1.1mX2.2m
Weight: 3200Kg
This machine is designed to make bevel on both small glass and big glass. The back conveyor track can be moved up and down according to glass size. For small glass size, the back conveyor track can be moved upward. For big glass size, the back conveyor track can be moved downward, it adopt PLC control and operator interface. The Screen can show glass thickness, bevel angle, bevel width and back track height.
Conveyors use big roller chain transmitting system, glass griping pads has design for working small glass, it is changeable after wear off. This structure guarantee glass is stably moved. The working precision is high.
Use high precision low vibration ABB motor, specially for beveling machine.
Working speed adjustment through speed regulator, manually.
Speed: 0.3m-3m/min
Max. bevel width: 40mm
Min. glass size: 30mmX30mm
Glass thickness: 4mm-15mm
Bevel angle: 0°-25°/ 0°-45°
Total power: 21 KW (380V 50Hz)
Total dimension: 6.7mX1.1mX2.2m
Weight: 5000Kg
This machine adopt PLC control and operator interface. The Screen shows every detailed parameters of glass.
The two conveyor belts are driven by two high precision servo motors. The synchronism of transmitting is very high. The torsion of output keeps the constant.
The mobile grinding section moves along linear twin ball bearing guide. The transmission is implemented through twin ball bearing lead screws, which is driven by motor with break.
The raise/drop of upper tracking system and upper arris motors are driven by motors. It can be set automatically according to different glass thickness input.
The polishing wheel is operated by air, which can move forwad/back according to glass position.
This machine use high precision low vibration ABB motor.
This machine adopt timing belts transmission.
The machine equipped a auto lubrication pump, which lubricate the lead screw..
Working speed adjustment through Frequency inverter.
Min. glass width: 260mm
Max. glass width: 4500mm
Glass thickness: 3mm-30mm
Working Speed: 0. 5m-7m/min
Speed of width adjustment 0-1400 mm/min
Total power: 50KW
Working Air pressure 0.15～0.8MPa
Outer dimension 5301×4421×1606 mm
The machine performs bottom edge grinding/ polishing on flat glass, with arris grinding.
Conveyor adopt chainless rolling transmitting system, which consists of three bearings rolling along high precision tempered steel guides, the movement of glass is very stable.
Control system adopt Mitsubishi PLC control unit, which has automatic and manual control functions,
The main working parameters are set and displayed through an operator interface.
Working speed is electronically adjustable.
Amperometers allow to check wheel absorption and therefore it’s correct functioning.
Spindles are driven by high quality ABB motors.
working Speed: 0.1m-3.8m/min
Grinding depth: 3mm
Max. arris width: 2.5mm
Glass thickness: 3mm-30mm
Min. glass Size: 25mmX25mmX8mm
Total Power: 19.85kw
Overall Dimension: 8.0mx1.2mx2.0m
Total Weight: 5700kg
The machine is suitable for grinding and polishing exterior edge of shaped glass. By changing grinding wheel of different shape, flat edge with arris, pencil edge, bevel edge and OG edge can be processed. The height of spindle can be adjusted easily. The pneumatic cylinder makes it possible that round and simple shape glass can be processed automatically.
Glass thickness: 3mm-30mm
Glass rotation diameter: 100-1300mm
Max. bevel width: 35mm
Rotation speed of working table: 0.2-2.5 r/min
Rotation speed of single suction disk: 1.2-6 r/min
Total power: 2.2KW
Overall dimension: 1.5mX1.5mX1.6m
Weight: 500Kg
This machine perform normal edge polishing, the pneumatic polishing system makes the machine more friendly for operation, the result is more ideal.
This machine use PLC control and touch panel operating system. The machine can run in automatic mode and manual mode
Conveyor use chain transmitting system, each pad contains a bearing which roll along the guide groove.
Working speed is adjustable through speed regulator.
Worktable height: 1100mm
Grinding speed: 0.8-4.5m/min, variable frequency adjustment
Voltage: 380V±10%, 50HZ±1HZ.
Installed power: 20kw
Weight: 3200kg、
Processing range:
Grinding depth: 3mm
Max. arris width: 2.5mm
The machine is designed for grinding bottom edge of flat glass, with arris grinding. It is suitable for rough processing before tempering and the other further processing.
Conveyor adopts chain transmitting system consisting of special stretchy rubber pad.
Front rail is driven by motors and move in parallel to adapt to different glass thickness.
Working speed is adjustable through speed regulator.
Working speed and glass thickness appear on digital display.
This machine is featured by compact structure, small base dimension, high speed, stable quality and low price.
working Speed: 0.8m-4m/min
Grinding depth: 3mm
Max. arris width: 2.5mm
Min. glass size: 60mmx60mmx8mm
Glass thickness: 3mm-25mm
Total Power: 11kw
Overall Dimension: 5.8mX1mX1.8m
Total Weight: 1700kg
The machine is designed for grinding/polishing bottom edge of flat glass, with arris grinding.
Conveyor adopts chain transmitting system consisting of special stretchy rubber pad.
Front rail is driven by motors and move in parallel to adapt to different glass thickness.
Working speed is adjustable through speed regulator.
Working speed and glass thickness appear on digital display.
Amperometer allow to check wheel absorption and therefore it’s correct functioning.
Spindles for arris adopt drag plates structure, which is no vibration in working.
working speed: 0.8-4.0m/min
Grinding depth: 3mm
Max. arris width: 2.5mm
Min. glass size: 80mmx80mmx8mm
Glass thickness: 3-25mm
Total power: 18.75kw
Total dimension: 6.9×1.0x2.5m
Total weight: 3100kg
This machine can execute normal bottom edge polishing, it can also make miter edge of 0-45 degree.
This machine use PLC control and touch panel operating system. The machine can run in automatic mode and manual mode.
The four motors can adjust angle from 0 degree to 45 degree for polishing bottom edge and miter edge.
The fine polishing machine use pneumatic system, which has good working effect.
Glass thickness: 3-25mm
Miter angle:0- 45°
Front miter removal :8 mm
Min. glass size: 100×100
Overall dimension(L.W.H):6900x1000x2500mm
Weight: 3000kg
Installed power: 18kw
GLASS MANUFACTURER PRODUCT LIST
======================================
Double Edging Machine
GLASS MANUFACTURER CONTACT INFO
======================================
Tel :+86 757 23328802
Address: Dadu industrial zone, Wendeng Road, Chencun Town, Shunde, Foshan City, P.R.C
GLASS MANUFACTURER COMPANY PROFILE
======================================
ZXM glass Machinery co.,ltd was found in 2001, Through these years, ZXM has grown into a company owning 160 staff and production capacity of 1000 machine per year. From the foundation of the company, ZXM has been concentrating on developing glass grinding machine, and specially developed 5 series, over 20 different models. The new products are constantly being developed.
