Author Archives: [email protected], EVA glass interlayer film for safety glass

2. Transportation EVA Glass Laminating Oven Electrical cabinets, vacuum pump, storage temperature of the cooling fan：-25℃～55℃. Temperature during transportation：allow 70℃no more than 24hours. In order to transportation,machine take apart into furnace body (include vacuum bed, vacuum bed frame),vacuum pump（diagram 3）, cooling blower（diagram 3）,electric cabinet, outer guide（show in the outer guide and furnace body ground connection …

Continue reading “Transportation of EVA Glass Laminating Oven”

1.3 Note on the noise The EVA Glass Laminating Oven noise is mainly from vacuum pumps, fans operation, under the condition that EVA Glass Laminating Oven in vacuum pumps, circulating fan running at the same time, in the distance of EVA Glass Laminating Oven 1m, H1.6m test the Noise value no less than 76dB. The …

Continue reading “The EVA Glass Laminating Oven noise is mainly from vacuum pumps, fans operation”

1.2 Safety Marks List The following logo is affixed to the equipment dangerous place accordingly, should be regularly checked equipment on the state of security identification, signs such as damage, loss, should be replaced immediately. 1 Attention to electric shocks！ On the Cabinet and the electrical Trunking 2 Attention to high-temperature！ Furnace door frame 3 …

Continue reading “Safety Marks List EVA laminated glass machine safety galzing location”

Royal Blue Ethylene Vinyl Acetate Copolymer EVA interlayer film for laminated glass safety glazing

Cast in place (CIP) The edges of the glasses are taped using translucent double-sided adhesive tape. The tape retains the liquid and determines the thickness of the resin interlayer. The liquid resin is pumped, into the envelope, where it spreads evenly – even between irregular surfaces. All the air is removed out and corners and …

Continue reading “Wet Liquid Safety Glazing Methods for manufacturering laminated glass”