Silicone series Curtain wall series Window & door series Electrical industry

======================================
GLASS MANUFACTURER MAIN PRODUCT                                  
======================================

Product Name: MF881 Two Component Silicone Structural Sealant
Shelves time: 2011-09-05
Views : 81
　　APPLICATION FIELDS:

　　● Two component, neutral cured silicone structural sealant, formulated for structural glazing,

　　secondary sealing of insulating glass units, and the hidden-frame curtain wall.

　　● Excellent adhesion to most building materials such as glass, aluminum alloy, and galvanized-

　　steel, stainless steel etc.

　　● Solvent free, primers are not required.

　　● High elasticity and high modulus.

　　● Excellent resistance to high & low temperature and air aging.

　　TECHNICAL DATA – CHEMICAL CHARACTERISTICS

　SURFACE PREPARATION:

　　GLASS / SPACER – To achieve good adhesion, the glass/ spacer surface must be clean and

　　free of any residue.

　　MIXING INSTRUCTIONS:

　　When using an automatic pump mixer ensure the mixing ratio is correct.

　　The mixing ratio by weight is 12:1.Curing speed can be adjusted (range of A:B=11:1～14:1 by weight, the more Com B, the faster curing time).

　　ATTENTION:

　　1. Do a test on compatibility and adhesive property before using.

　　2. Com B should not contact the air for long time because it will react with water in the air.

　　STORAGE:

　　12 months stored in unopened containers in cool, dry and ventilated places.

　　PACKING:

　　Pump application:

　　Drum Package: Com A 200L/Metal barrel (Inner diameter: 567±2mm)

　　Com B 20L/Plastic barrel (Inner diameter: 285±2mm)

　　Hand application:

　　Barrel Package: Com A 20L/ Plastic barrel (Net weight: 25kg)

　　Com B 310ml/Plastic cartridge(Net Vol.:310ml)

　　TRANSPORT:

　　Non-dangerous, can be transported by train, ship, automobile and plane.

Product Name: MF889 Silicone Weatherproofing Sealant
Shelves time: 2011-09-05
Views : 50

Introduction:

　　One component, neutral cured, high elastic

　　Special for all kinds of curtain walls.

　　Conveniently used in the temperature range of 10～50℃;

　　Excellent resistance to weather aging, low and high temperature, keeping good ability even in the range of -60℃~180℃;

　　Excellent adhesion to most building material without primer

　　Movement capability: ±25﹪.

　　No corrosion to the surface; no pollution to the environment.

　　Purposes:

　　Mainly applied in weatherproofing and waterproofing sealing for glazing curtain walls or aluminum panel curtain walls.

　　Properties:

　　Consistent with standards: GB/T14683, JC/T882 & ASTM C920

　　Methods of Application:

　　1. The surface must be clean, dry and free of any traces of grease or dust.

　　2. It can be used directly in the temperature 10～50℃.

　　3. Masking tape should be used in case of contamination and be got rid of after using.

　　Storage:

　　The shelf life will be 12 months stored in cool, dry and ventilated places below 27℃.

　　Package:

　　Cartridge Package: 300ml/piece, 25pcs/carton

　　Sausage Package: 592ml/piece, 20pcs/carton

　　Transportation:

　　MF889 is non-dangerous, can be transported by train, automobile, ship and plane.

Product Name: Aluminium Spacer for Insulating Glass
Shelves time: 2011-09-05
Views : 143

　　Brief Introduction:

　　1. Roll forming line for aluminum window spacer profiles imported from Germany with the most advanced

　　technology adopted European standard.

　　2. Aluminium strip thickness 0.35mm, EN-AW-3003 H26, mirror,anti-corrosion.

　　3. Unique design profiles, excellent bending property.

　　4. Unique surface treatment, better sealing properties with sealants.

　　5. High-frequency induction welded, continuous welding seam quality monitoring by eddy current system.

　　6. No burr and no deformation after cutting, better for connected.

　　7. Marking LOGO as customer special requirement.

Product Name: MF-DJ910 Hot Applied Butyl Sealant for Insulating Glass
Shelves time: 2011-09-05
Views : 76

Introduction　　APPLICATION FIELDS:

　　● One component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for

　　primary sealing of insulating glass units.

　　● It can keep its plastic and sealing properties in a wide temperature range.

　　● Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel. ● Minimum moisture vapour and gas permeation.

　　TECHNICAL DATA – CHEMICAL CHARACTERISTICS

SURFACE PREPARATION:

　　GLASS / SPACER – To achieve good adhesion, the glass/ spacer surface must be clean, dry

　　and free of any residue.

　　APPLICATION INSTRUCTIONS:

　　MF-DJ910 shall be applied at a temperature between 100 ℃ and 150 ℃ using appropriate extruders.

　　STORAGE:

　　24 months stored in cool, dry and ventilated places.

　　PACKING:

　　Paper drum: 7 kg/barrel

　　6 kg/barrel

　　5 kg/barrel

　　2 kg/barrel

　　1 kg/barrel

　　200L/ steel drum

　　TRANSPORT:

　　Non-dangerous, can be transported by train, ship, automobile and plane.

Product Name: MF961 Silicone Electrical Sealant
Shelves time: 2011-09-05
Views : 15

　　MF961 is one component, neutral cure at room temperature, high elasticity silicone sealant. It has excellent flame retardancy, excellent resistance to UV and air aging. Mainly applied in the encapsulation and sealing of solar cell module, photoelectric display, and other electronic products, etc.

　　★ Characteristics:

　　Can be extruded directly at 10℃~50℃; excellent adhesion to glass, ceramic, metal materials.

　　Neutral cure, non-corrosive to the surface.

　　Outstanding resistance to UV and air aging.

　　Excellent resistance to low and high temperature; keeping good ability even in the range of -60℃~200℃.

　　High elasticity; elongation > 400%.

　　Excellent flame retardancy.

　　No pollution to the environment.

　　★ Application Fields:

　　Solar cell module encapsulation and sealing.

　　Photoelectric display encapsulation and sealing.

　　Various electronic products encapsulation and sealing.

　　★ Typical Product Data

Standard: GB/T 528 GB/T 531 GB/T 1692 GB/T 1695 UL 94

　　★ Methods of Application:

　　1. For good adhesion, the surface must be clean and dry without dust. Special materials (such as copper, polycarbonate, polypropylene, polytetrafluoroethylene, etc.) need compatibility test before using to determine the preprocessing method for good adhesive property.

　　2. In case of limited access to air or low humidity, curing time will be extended.

　　3. Masking tape should be used for preventing contamination and be got rid of after sealing.

　　★ Curing Time:

　　Sealant will be cured inwards after surface curing. Within 24h curing depth will be about 2mm~4mm. Curing time will be extended in the deeper inside air-limited part. Low temperature and low humidity will also lead to curing time extension. It is recommended that users should be patient and give enough time for the sealant curing completeness before handling and packaging the bonded parts. The curing time depends on multiple factors, and should be determined by the specific purpose of sealant.

　　★ Restriction:

　　Not applicable in the following circumstances:

　　Any building materials exuding grease, plasticizer or solvent.

　　Sealed areas seclusion from air.

　　Frosted or humid surface.

　　★ Attention:

　　1. In case of contact with eyes, rinse immediately with plenty of water.

　　2. Avoid contacting with skins for a long time.

　　3. Avoid contaminating food, medicine or cosmetics.

　　★ Package:

　　Cartridge Package: 300ml/pc, 25pcs/carton

　　Sausage Package: 592ml/pc, 20pcs/carton

　　★ Storage:

　　The shelf life will be 12 months stored in cool, dry and ventilated places below 27℃.

　　★ Transportation:

　　MF961 is non-dangerous, can be transported by train, automobile, ship and plane.

======================================
GLASS MANUFACTURER PRODUCT LIST
======================================

Silicone series (12)

  Curtain wall series (6)

  I.G. unit series (1)

  Window & door series (2)

  Fireproofing series (3)

  Polysulfide series (1)

  Butyl series (1)

  Aluminium spacer (1)

  Electrical industry (4)

  Automobile industry (1)

  Road & bridge sealant (0)

======================================
GLASS MANUFACTURER CONTACT INFO
======================================
Zhengzhou Zhongyuan Applied Technology Research and Development Co.,Ltd

Address: No.26, Yinping Road, Zhengzhou Hi-tech Industrial Development Zone, China

Tel/Fax: +86-371-67991808

E-mail: [email protected]

======================================
GLASS MANUFACTURER COMPANY PROFILE
======================================
Zhengzhou Zhongyuan Applied Technology Research and Development Co., Ltd. was founded in 1983, thrived as the first hi-tech company specialized in sealant research, produce, and sale. It was one of the first enterprises engaging in Silicone Structural Sealant production and sale appointed by the National Economic and Trade Committee. The qualified personnel, advanced technology, scientific management and large sales market are all its characteristics.

Since its foundation, the company has undertaken and accomplished many important national research programs, especially “MF-840 Polysulfide Sealant for Insulating Glass”. Since being put into production and accepted by many users as substitute for the imported sealant for its advanced characteristics, MF-840 has been widely applied in various professions, areas and automatic production lines. In 1988, the company started to research Silicone Structural Sealant. Its successful production has infilled the blank of the sealant field and made great contribution to China’s insulating glass profession and building area. In 2009, rollforming Line for Aluminum window spacer profiles imported from Germany with the most advanced technology adopted European standard. Our products can be seen all over the world and the company has passed ISO9001 Quality System Certificate and ISO14001 Environment System Certificate.

So far, we have four series of sealant (over 40 types), which are Silicone Sealant, Polysulfide Sealant and Butyl Sealant. They have passed SGS Certificate and EU standard. The Silicone series have passed the test of Singapore National Lab and America DL Lab. Our quality target is pursuing advanced technique, top quality, high efficiency, great benefit and meeting the customers’ requirements as much as possible.

If you are looking for any glass products in China, or need any help of glass(specially laminated glass, smart glass) in China, just send an email to [ [email protected] ] , and you will get the answers of what you need in 24 hours. To learn more, please go to www.HelloGlass.com .